GlassCast Epoxy products

Showing all 25 results

  • Choose your GlassCast Resin

    If you’re reading this then you’ve probably already joined the many thousand professionals and serious hobbyists who have chosen GlassCast clear epoxy resin for their creative projects but you maybe don’t feel 100% sure which GlassCast resin you need… This page is here to help!

    There are currently three resins in the GlassCast range; GlassCast 3, GlassCast 10 and GlassCast 50. The numbers relate to the thickness, in millimetres, that each resin is typically used at; i.e. 3mm, 10mm and 50mm.

    See below for more information.

    View products
  • Sale!

    Wooden Mixing Sticks

    0.504.98 (ex vat)

    Wooden tongue depressors, approx 6″ (150mm) long, suitable for smaller mixes of Resin, Pigments and Flocoats.

  • Sale!

    Plastic Containers

    0.896.95 (ex vat)

    Used for mixing resins / topcoats and for cleaning tools in acetone. Unaffected by resin and can be reused by “cracking out” old resin build up. Lids can be supplied separately. Available in various sizes – 250ml / 500ml / 1lt / 2.5lt / 5lt / 10lt / 20lt / 15lt Black.

  • Sale!

    Sandpaper Sheets

    1.05 (ex vat)

    80grit sand paper is used for sanding the cured fibreglass coat – to remove sharp strands and to abrade the surface prior to laying another layer of chopped strand mat or to painting the final Topcoat. Sold per sheet.

  • Sale!

    Calibrated Mixing Cups

    1.281.98 (ex vat)

    These re-usable, calibrated mixing cups are ideal for mixing GlassCast epoxy resins that require a mix ratio by volume – such as GlassCast 10 and GlassCast 50. Even when weighing your resin out, they are still a handy reusable pot for mixing resin.

  • Sale!

    Spreader – Notched

    1.295.90 (ex vat)

    Simple, reusable resin spreader perfect for spreading GlassCast epoxy resin over artwork, countertops, bartops, tables, floors and more.

  • Sale!

    Calibrated Containers

    1.684.95 (ex vat)

    Perfect for measuring small amounts of Catalyst (Hardener) into Polyester or Epoxy Resins / Topcoats / Gelcoat.  Self Releasing – Can be re-used.

    • Conforms to ISO 7056 – 1981 (E) and BS 5404 Part 1.
    • Strong & flexible Polypropylene.
    • High translucency
    • Permanent graduations are moulded in for reproducibility.
    • Excellent chemical resistance.
    • Ideal for repair or laminating small areas
  • Sale!

    Disposable Chemical Resistant Gloves

    1.8014.98 (ex vat)

    Introducing the Microflex 93-260, the glove that’s changing the face of chemical hand protection. With an innovative three layer design, Microflex 93-260 offers the reliable protection workers need when handling chemicals.
    The glove’s unique, triple-layer construction features a soft interior specifically designed to enable easy donning and doffing. Its flexible middle layer delivers maximum protection against acids and bases, while the durable exterior delivers maximum protection against organic solvents.
    The Microflex 93-260 provides such tough chemical protection that it has met requirements for EN 374 certification in Europe. When tested against aggressive chemicals like Sulfuric Acid, N Heptane, Hexane and Methanol, the Microflex 93-260 demonstrates impressive permeation breakthrough times.
    Made with an innovative nitrile and neoprene composite material, the Microflex® 93-260 measures only 7.8 mil (0.19 mm) thick and delivers all the benefits of a single-use, splash resistant glove: exceptional comfort, fit, dexterity and grip.
    50 Gloves per box. Size:XL (9.5 – 10)

  • Plastic Stirrer

    1.95 (ex vat)

    Wipe Clean and Reuse • Approx 27.5cm x 2.7cm • Useful when mixing Resins & Topcoats

    Add to basket
  • Sale! Curl Pigments

    Solid Colour Pigments – 20ml

    2.465.79 (ex vat)

    Super-concentrated, solid colour liquid pigments used to add strong, vibrant, opaque colour to resin for projects including resin flow art, countertops, decorative flooring, wood inlays, resin castings and more.

    Please Note: 20ml of colour pigment will do up to 5kg GlassCast Resin

  • Sale! Silicone Oil

    Celz Silicone Oil 50ml for GlassCast Epoxy Resins

    4.20 3.35 (ex vat)

    High quality silicone cell dispersion media for use in epoxy resin art to create amazing cells and lacing effects

    Add to basket
  • Sale!

    Safety Glasses

    4.55 3.98 (ex vat)

    • Wrap around spectacle.
    • Anti fog polycarbonate lens.
    • Scratch resistant.
    • Adjustable side arms.
    • Low impact & 99.9% UV protected.
    • Nylon frame.
    • Conforms to EN166 -1F.
    Read more
  • Nitrile Gloves (XL) Box of 100

    6.85 (ex vat)

    Box of 100 lightly powdered X large nitrile gloves. These are tough, sensitive, non-sterile gloves with many uses. Ambidextrous with beaded cuff. Size: XL

    Read more
  • Sale!

    Metallic Pigment Powders- 20ml

    6.987.94 (ex vat)

    High quality metallic-effect powder pigments for use with GlassCast® clear epoxy casting and coating resins. Adding just a few grams of these potent powders to your resin will create eye-catching shimmering colour effects which move and react in the light.

     

  • Sale!

    Resin Barrier/ Release Tape

    10.8816.85 (ex vat)

    This special high quality tape is designed specifically for use as a barrier or release tape for industrial resins like epoxy. It is smooth, very strong, non-stretch and totally non-stick for epoxy resin making it incredibly useful for a wide range of epoxy resin applications.

  • Sale!

    Precision Mini Scale

    14.53 12.86 (ex vat)

    Precision Mini Scale

    Mini digital scale with extra accuracy down to 0.1g specially for weighing smaller quantities of resins, hardeners and pigments where extra accuracy is needed.

    Perfect for jewellery makers, model-makers and in fact anyone generally working with smaller quantities of resins and pigments!

  • Sale! Translucent Pigments

    Translucent Tinting Pigments for GlassCast Epoxy Resin

    16.87 14.94 (ex vat)

    A high quality translucent tinting pigment intended for creating subtle tints or translucent colouring to water-clear casting resins including polyester, polyurethane and epoxies.

    The colours are ideal for tinting or pigmenting jewellery, sculptures and design prototypes with anywhere between a faint hint of colour to a very strong, yet still translucent colour.

    The pigments can only be sold in a pack of 6 primary colours;

    Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Purple / 25ml Yellow / 25ml Orange

    Add to basket
  • Sale!

    10kg Digital Scale

    16.62 14.95 (ex vat)

    These high capacity, high accuracy electronic digital scales are perfect for measuring GlassCast Resin and Hardener to the correct mix ratio.

  • Sale! 6 Neon Pigments

    Neon Tinting Pigments for GlassCast Epoxy Resin

    17.23 15.88 (ex vat)

    Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.

    Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.

    The pigments can only be sold in a pack of 6 Neon colours;

    Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange

    Add to basket
  • Sale! GlassCast 3 range

    GlassCast 3 Clear Coating Resin – Penny Floors/ Table, Counter & Bartops/ Clear Coating

    16.50610.50 (ex vat)

     

    GlassCast® 3 epoxy resin is a remarkable clear epoxy resin developed specifically to provide a beautiful, hard wearing, clear gloss surface for tabletops, bartops, decorative floor effects, furniture and creative projects. You could also add some Colour Pigments  (Translucent, Solid, Metallic, Silicone Oil, Pinata, or Neon) to enhance your project.

    Materials Calculator

    Suggested Uses;

    • Tabletops* (including embedments like bottletops, corks, pebbles)
    • Bartops* (including crushed glass, beer mats etc.)
    • Furniture (including reclaimed wood, driftwood, decoupage etc. & Penny Floors).

    See full details –  Video’s,  /   Tutorial (Penny FloorNeon Table)   /  FAQ’S

    How much resin will I need?

    1kg = 1mm over 1sqm – You will require 1 kilo of GlassCast Resin per millimetre of thickness required over a 1 sqm area.

    Stock Update/ 2nd July 2020Yes, the GlassCast 3 is back in stock. You can now order what you want. Thank you for your patience.

  • Sale!

    GlassCast 10 Clear Casting Resin – Jewellery/ 3D Art/ Pen Blanks/ Clear Casting into Moulds

    16.50520.96 (ex vat)

    GlassCast® 10 is a water-clear, UV resistant epoxy casting resin suitable for castings and deep coatings up to 10mm in thickness. It is recommended for clear jewellery resin casting, 3D resin art, encapsulation and filling holes and gaps in wood (up to 10mm) and can be cast in multiple layers to an unlimited depth*. Open surface will require polishing. You could also add some Colour Pigments  (TranslucentSolid, Metallic, Silicone, Pinata, or Neon) to enhance your project.

    Materials Calculator

    Suggested uses;

    • Clear or tinted resin jewellery / paperweights.
    • Resin & wood jewellery / walking stick handles and furniture pieces.
    • 3D resin art / Pen Blanks
    • Thick counter-tops (with embedded objects)
    • Water effects for models / scenarios

    How much resin will I need?

    1kg = 1mm over 1sqmYou will require 1 kilo of resin per millimetre of thickness required over a 1 sqm area.

    See full details, including some Video’s below;

     

  • Sale!

    GlassCast 50 Clear Casting Resin – River Tables/ Wood Turning-Bowls/ Large Jewellery

    16.50520.96 (ex vat)

    GlassCast® 50 is the remarkable new water-clear epoxy casting resin from the makers of the famous GlassCast product. GlassCast 50 is perfect for creating thick, water-clear, bubble-free castings up to 25mm deep. It is especially recommended for river tables, knot filling and other furniture projects where you will be casting a very thick layer of resin (up to 25mm per pour) and require the best clarity. It can be layered to create deep castings of unlimited depth. You could also add some Colour Pigments  (Translucent, Solid, Metallic, Silicone Oil, Pinata, or Neon) to enhance your project.

    Materials Calculator

    Suggested uses:

    • River tables / knot holes
    • Wood and resin combination furniture (lamps, sculptures)
    • Clear castings / sculptures / Encapsulations / Paperweights

    How much resin will I need?

    1kg = 1mm over 1sqmYou will require 1 kilo of resin per millimetre of thickness required over a 1 sqm area.

    See full details, including some Video’s below;

  • Sale!

    Meguiar’s Wax Release Agent – Mirror Glaze No.8 Paste

    23.50 19.75 (ex vat)

    Description: High quality maximum mold release paste wax Objective: To create a barrier-film that provides multiple releases with ultra high gloss finished parts on new and seasoned molds. Features: – The industries first and most widely used mold release wax – Recognized worldwide as the industry standard for paste mold release waxes – Wax of choice when maximum release power is required – Withstands exothermic temperatures up to 250° F (121º C) Benefits: – Specially formulated to provide the maximum number of releases – Especially useful on tooling, new molds, and production use Tools Needed: Meguiar’s Foam Applicator (W-0004) or 100% cotton terry cloth towel Mold Prep: New mold or plug must be fully cured before using the Meguiar’s Maximum Mold Release Wax (M-08). Safety Tip: Always wear appropriate eye and skin protection. Safety Data: Material Safety Data Sheets are available for all Meguiar’s products and should be consulted prior to use of the product. Professional Tips: For the highest quality parts, precede Meguiar’s Maximum Mold Release Wax (M-08) with Meguiar’s Velocity line of cleaner, compounds, and polishes. DIRECTIONS: Meguiar’s Maximum Mold Release Wax (M-08) should be applied at ambient room temperatures above 50º F (10º C). New and Seasoned Molds: 1. Apply by hand five (5) to eight (8) coats of Meguiar’s Maximum Mold Release Wax (M-08). o Apply a thin coat of wax, wait for approximately 5 to 10 minutes for the wax to haze up. o Wipe off the haze using a 100% cotton terry cloth towel. o Wait for an additional 20 to 30 minutes for the wax to fully cure then apply next coat. 2. Once all five (5) to eight (8) coats have been applied, the mold is ready for production. 3. For the first five (5) pulls add one (1) additional coat between each pull. 4. After the fifth pull, run mold until release becomes slight snug then apply one (1) additional coat of wax.

    Add to basket
  • Sale!

    Polypropylene Sheet – 100 x 100cm

    34.50 29.89 (ex vat)

    Polypropylene plastic sheet is ideal for use as a non-stick baseboard or barriers for your GlassCast epoxy resin projects. It has a smooth finish and is easy to cut and bond. Use it to create a base or sides for a river table or custom shaped containers for jewellery or wood turning projects.

  • Sale!

    Pinata Color Exciter Pack of 9 Alcohol Inks

    42.50 36.20 (ex vat)

    Popular with jewellery makers and resin coaster artists, alcohol inks can be dripped into epoxy resin to create a unique and attractive colour ‘trail’ effect.

    Add to basket