Tools & Accessories

Showing 17–23 of 23 results

  • Sale!

    Meguiars 205 Ultra Finishing Polish

    24.35 19.43 (ex vat)

    This polish uses advanced technology to produce a deep gloss and rich, swirl-free results. The polish uses Meguiar’s Super Micro Abrasive Technology. Designed for use after Meguiars M105 Ultra-Cut Compound and all other Meguiar’s Compounds.

  • Sale!

    Meguiars 105 Ultra Cutting Compound

    24.35 19.43 (ex vat)

    Meguiar’s Mirror Glaze Ultra-Cut Compound is formulated with exclusive, super micro abrasive technology that features ultra-fast cutting ability to remove 1200 grit or finer sanding marks. Advanced super micro abrasives leave best in class finish. This professional grade formula is also great for removing scratches, defects, acid rain and severe swirls or holograms. Safe and effective on all glossy paint finishes including clear coats.

  • Sale!

    Meguiar’s Wax Release Agent – Mirror Glaze No.8 Paste

    23.50 19.75 (ex vat)

    Description: High quality maximum mold release paste wax Objective: To create a barrier-film that provides multiple releases with ultra high gloss finished parts on new and seasoned molds. Features: – The industries first and most widely used mold release wax – Recognized worldwide as the industry standard for paste mold release waxes – Wax of choice when maximum release power is required – Withstands exothermic temperatures up to 250° F (121º C) Benefits: – Specially formulated to provide the maximum number of releases – Especially useful on tooling, new molds, and production use Tools Needed: Meguiar’s Foam Applicator (W-0004) or 100% cotton terry cloth towel Mold Prep: New mold or plug must be fully cured before using the Meguiar’s Maximum Mold Release Wax (M-08). Safety Tip: Always wear appropriate eye and skin protection. Safety Data: Material Safety Data Sheets are available for all Meguiar’s products and should be consulted prior to use of the product. Professional Tips: For the highest quality parts, precede Meguiar’s Maximum Mold Release Wax (M-08) with Meguiar’s Velocity line of cleaner, compounds, and polishes. DIRECTIONS: Meguiar’s Maximum Mold Release Wax (M-08) should be applied at ambient room temperatures above 50º F (10º C). New and Seasoned Molds: 1. Apply by hand five (5) to eight (8) coats of Meguiar’s Maximum Mold Release Wax (M-08). o Apply a thin coat of wax, wait for approximately 5 to 10 minutes for the wax to haze up. o Wipe off the haze using a 100% cotton terry cloth towel. o Wait for an additional 20 to 30 minutes for the wax to fully cure then apply next coat. 2. Once all five (5) to eight (8) coats have been applied, the mold is ready for production. 3. For the first five (5) pulls add one (1) additional coat between each pull. 4. After the fifth pull, run mold until release becomes slight snug then apply one (1) additional coat of wax.

    Add to basket
  • Sale!

    Dispenser – 50ml Twin Tube Cartridge Gun

    24.85 19.88 (ex vat)

    50ml twin cartridge dispenser gun suitable for all our 50ml Permabond (ET500 Epoxy adhesive, as well as most other 50ml 1:1 twin-tube adhesive cartridges. Normally used together with disposable static mixer nozzles, sold separately.

    Add to basket
  • Sale!

    Meguiar’s Yellow Wax

    27.60 21.87 (ex vat)

    Premium yellow Carnauba wax blended with silicones, polymers and other waxes. Adds richness and depth of colour. Provides ultimate high gloss protection to any previously cleaned and polished gel coat finish.

    Add to basket
  • Sale!

    ET500 Structural Epoxy Adhesive

    34.92 28.76 (ex vat)

    ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive. ET500 has very good bond strength to a wide variety of substrates including metals, composites, wood, ceramics and some plastics.

    5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener).

  • Sale!

    Polypropylene Sheet – 100 x 100cm

    34.50 29.89 (ex vat)

    Polypropylene plastic sheet is ideal for use as a non-stick baseboard or barriers for your GlassCast epoxy resin projects. It has a smooth finish and is easy to cut and bond. Use it to create a base or sides for a river table or custom shaped containers for jewellery or wood turning projects.