Tools & Ancillaries

Showing all 46 results

  • Crestabond M1-30 Bonding Agent

    Crestabond M1-30 Bonding Agent

    Crestabond® M1-30

    Crestabond M1-30 is a toughened, two component 10:1 MMA structural adhesive which is designed for bonding a wide range of substrates including metals, plastics and composite materials in industrial applications.

    This adhesive demonstrates excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive, requiring minimal surface preparation helping to reduce overall production costs and increase productivity.  Crestabond M1-30 has a working time of between 25 and 35 minutes.

    Available in different curing times: M1-05 / M1-20 / M1- 30 & M1-60 (5, 20, 30 & 60 minutes) and in 400ml & 50ml cartridges. Special dispensing gun available.

    Please contact +353 1 466 3786 for availability. For more information, check our Data sheet.

    Read more
  • Dispensing Gun Crestabond

    Dispensing Gun Crestabond Bonding Agent

    Co-Axial Cartridges Manual Bi-Mixer Applicator

    • Manual bi-mixer applicator for co-axial cartridges (Crestabond)
    • For use with 380ml co-axial cartridges
    • Ideal for use where there is no access to compressed air
    • This range comprises simple budget tools through to the most powerful hand applicators available.CM 380/10 for 10:1 co-axial cartridges

     

    Read more
  • Sale!

    25mm Brush

    0.786.96 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Sandpaper Sheets

    1.05 (ex vat)

    80grit sand paper is used for sanding the cured fibreglass coat – to remove sharp strands and to abrade the surface prior to laying another layer of chopped strand mat or to painting the final Topcoat. Sold per sheet.

  • Sale!

    50mm Brush

    1.289.96 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Calibrated Mixing Cups

    1.281.98 (ex vat)

    These re-usable, calibrated mixing cups are ideal for mixing GlassCast epoxy resins that require a mix ratio by volume – such as GlassCast 10 and GlassCast 50. Even when weighing your resin out, they are still a handy reusable pot for mixing resin.

  • Sale!

    Spreader – Notched

    1.295.90 (ex vat)

    Simple, reusable resin spreader perfect for spreading GlassCast epoxy resin over artwork, countertops, bartops, tables, floors and more.

  • Sale!

    75mm Brush

    1.7814.88 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    150mm (6″) Roller Handle

    1.97 (ex vat)

    Roller frame to fit our 150mm push fit refills.

    Add to basket
  • 100mm (4″) Roller Handle

    1.98 (ex vat)

    Roller frame to fit our 100mm short or long hair push fit refills.

    Add to basket
  • Sale!

    100mm Brush

    1.9818.94 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale! Masking Tape

    Masking Tape For Decorating & Building Projects

    2.65 (ex vat)

    Masking Tape Of Top Quality For Building & Decorating 

    General purpose masking tape, suitable for all kinds of jobs in the Building, Industrial, and DIY sectors.

    • Compatible with Most Common Paints & Lacquers
    • Good Adhesion on All Surfaces even on irregular substrates.
    • Easy Removal without Adhesive Residue (remove within 36 hours)
    • Hand Tearable
    • Saturated Paper Backing
    • Synthetic Rubber Adhesive
    • 50mm (2”) wide x 50mts length
    • Sold per single roll.
    Add to basket
  • Sale!

    230mm (9″Heavy duty) Roller Handle

    3.79 (ex vat)

    Heavy Duty Roller frame to fit our 225mm push fit refills.

    Add to basket
  • Sale!

    Trimming Knife

    3.95 (ex vat)

    This retractable trimming knife is simple to use and safe to store.

    • Durable aluminium body
    • Spare blade storage inside
    Add to basket
  • Sale!

    225mm (9″)Short Hair Refill (Flocoat/ Gelcoat)

    3.98 (ex vat)

    These rollers are made on 48mm diameter, polypropylene thermally bonded, acetone resistant core. Made from a velvet like polyester fibre woven into its backing for strength. This fabric will give a bubble free and fluff free finish when used for Gelcoat and Topcoat application. The 4″ and 6″ have a push on frame and the 9″ and 12″ have a cage frame for strength;

    Add to basket
  • Sale!

    225mm Long Hair Refills (Resin)

    3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • Sale!

    150mm x 41mm Mohair (Topcoat) Refill

    3.98 (ex vat)

    These short-pile refills are perfect for applying Flocoat/ Gelcoat & Resins. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″ & 12″).

    Add to basket
  • Sale!

    150mm x 41mm Blue Stripe (Resin) Refill

    3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • 100mm x 17mm Mohair (Topcoat) Refill

    3.98 (ex vat)

    These short-pile refills are perfect for applying Flocoat/ Gelcoat & Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″ & 12″).

    Add to basket
  • Sale!

    100mm x 17mm Blue Stripe (Resin) Refill

    3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • Sale!

    300mm (12″) Long Hair Refills (Resin)

    3.98 (ex vat)

    These Long-pile 300 x 45mm (12 x 1.75″) refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types.

    • Acetone resistant
    • Good all round pick-up, performance and coverage
    • Polyester will perform well in terms of Resin loading with minimum expenditure
    • For use with screw in 300mm (12″) Lugged Frame
    • Pro Fibreglass Extention Pole – 1200-2400cm (4-8′)
    Add to basket
  • Sale!

    300mm (12″) Short Hair Refill (Topcoat/ Gelcoat)

    4.60 (ex vat)

    These Short-pile 300 x 45mm (12 x 1.75″) refill are perfect for applying Topcoat/ Gelcoat & Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types.

    • Acetone resistant
    • Good all round pick-up, performance and coverage
    • They will perform well in terms of Topcoat & Resin loading with minimum expenditure
    • For use with screw in 300mm (12″) Lugged Frame
    • Pro Fibreglass Extention Pole – 1200-2400cm (4-8′)
    Add to basket
  • Sale!

    Hand Sander

    4.85 (ex vat)

    Professional Hand Sander

    • For use with sandpaper when smoothing all surfaces.
    • The padded surface gives improved sanding of uneven and rough surfaces
    • Simple wing nut for easy tightening and release of sandpaper securing bar.
    • Made of strong lightweight aluminium with polypropylene handle.
    • Dimensions – 240mm x 84mm
    • Lightweight handle.
    • Ideal for large surfaces such as plaster and dry wall.
    Add to basket
  • Sale!

    Frame – 300mm (12″) Screw Frame for Fibreglass Pole & 300mm Refills

    4.95 (ex vat)

    One piece cast aluminium for strength and durability. Lugged fitting accepts 8mm end cap refills. Screw-fit extension pole connection. Suitable for;

    • 300mm (12″) Polyester & Epoxy Resins, Topcoat & Gelcoat
    • 1200 – 2400mm (4 x 8) Pro Fibreglass Extention Pole
    Add to basket
  • Extension Pole

    4.96 (ex vat)

    Metal extension pole supplied complete with screw on adaptor to allow easy use with tapered handle if preferred. Length 825mm. Extends to 1390mm.

    Add to basket
  • Sale!

    50mm x 15mm Laminating Roller

    5.99 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Paper Rolls

    6.50 (ex vat)

    Ideal for both light and medium duty wiping tasks.

    Add to basket
  • Sale!

    70mm x 21mm Laminating Roller

    6.68 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    100mm x 15mm Laminating Roller

    6.98 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    100mm x 21mm Laminating Roller

    7.12 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    Soudal – Fix ALL

    7.96 (ex vat)

    Fix ALL

    A high quality, single component joint sealant with high adhesive strength. Also weatherproof and waterproof, which makes this product ideal for our roofing system. Size: 290ml

    Permanently flexible
    • Can be applied on wet surfaces, even under water
    • Can be painted
    • Odourless
    • Suitable for uneven surfaces
    • Fast cure even at low temperatures
    • Primerless application in most circumstances
    • No solvents, halogens, isocyanates, acids
    • Non staining
    • Extremely durable
    • Colour stable and UV Resistant

    Add to basket
  • Sale!

    140mm x 21mm Laminating Roller

    8.16 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    Corner Roller

    8.50 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool. Single wheel ‘Radius’ roller, used for corners where you need to consolidate matting or other types of reinforcements.

    Add to basket
  • Sale!

    140mm x 40mm Laminating Roller

    8.97 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sander Head

    9.85 (ex vat)

    Lightweight head for easy sanding of roof decks. It has a universal joint which can be used at any angle and comes with a cushion pad base. It also has wing nut to secure the clamps holding in the emery paper.

    Add to basket
  • Sale!

    140mm x 21mm Bubble Buster

    9.85 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    Resin Barrier/ Release Tape

    12.3519.85 (ex vat)

    This special high quality tape is designed specifically for use as a barrier or release tape for industrial resins like epoxy. It is smooth, very strong, non-stretch and totally non-stick for epoxy resin making it incredibly useful for a wide range of epoxy resin applications.

  • Sale!

    225mm x 21mm Laminating Roller

    12.72 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    225mm x 40mm Laminating Roller

    12.85 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    Precision Mini Scale

    13.86 (ex vat)

    Precision Mini Scale

    Mini digital scale with extra accuracy down to 0.1g specially for weighing smaller quantities of resins, hardeners and pigments where extra accuracy is needed.

    Perfect for jewellery makers, model-makers and in fact anyone generally working with smaller quantities of resins and pigments!

  • Sale!

    10kg Digital Scale

    17.82 (ex vat)

    These high capacity, high accuracy electronic digital scales are perfect for measuring GlassCast Resin and Hardener to the correct mix ratio.

  • Sale!

    Fibreglass Extension Pole

    19.85 (ex vat)

    Heavy duty Fibreglass and aluminium construction.

    • 1200 x 2400mm (4-8′) length
    • Quick release “Double Click” locking mechanism.
    • Screw fit end with push-fit adapter.
    • Professional fibreglass telescopic extension pole
    • Compatible with screw thread or push in rollers and accessories
    Add to basket
  • Sale!

    Dispenser – 50ml Twin Tube Cartridge Gun

    19.88 (ex vat)

    50ml twin cartridge dispenser gun suitable for all our 50ml Permabond (ET500 Epoxy adhesive, as well as most other 50ml 1:1 twin-tube adhesive cartridges. Normally used together with disposable static mixer nozzles, sold separately.

    Add to basket
  • Sale!

    ET500 Structural Epoxy Adhesive

    28.76 (ex vat)

    ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive. ET500 has very good bond strength to a wide variety of substrates including metals, composites, wood, ceramics and some plastics.

    5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener).

  • Sale!

    Polypropylene Sheet – 100 x 100cm

    29.89 (ex vat)

    Polypropylene plastic sheet is ideal for use as a non-stick baseboard or barriers for your GlassCast epoxy resin projects. It has a smooth finish and is easy to cut and bond. Use it to create a base or sides for a river table or custom shaped containers for jewellery or wood turning projects.

  • Sale!

    Lazer Thermometer

    38.95 (ex vat)

    Mini RayTemp infrared thermometer for routine day-to-day temperature checking.

    Ideal for measuring the temperature of the OSB board prior to applying the Resin & Chopped mat.

    No guessing on the amount of Hardener required for the resin & topcoat. See Catalyst Mixing Chart

    • Compact, lightweight & easy to use
    • Temperature range -50 to 330°C
    • Laser dot alignment
    • Target ratio 12:1

    Please note this should not be used for medical purposes

    Add to basket