Uncategorized

Showing 1–16 of 72 results

Dispensing Gun Crestabond Bonding Agent
Co-Axial Cartridges Manual Bi-Mixer Applicator
- Manual bi-mixer applicator for co-axial cartridges (Crestabond)
- For use with 380ml co-axial cartridges
- Ideal for use where there is no access to compressed air
- This range comprises simple budget tools through to the most powerful hand applicators available.CM 380/10 for 10:1 co-axial cartridges
Read more
Choose your GlassCast Resin

If you’re reading this then you’ve probably already joined the many thousand professionals and serious hobbyists who have chosen GlassCast clear epoxy resin for their creative projects but you maybe don’t feel 100% sure which GlassCast resin you need… This page is here to help!

There are currently three resins in the GlassCast range; GlassCast 3, GlassCast 10 and GlassCast 50. The numbers relate to the thickness, in millimetres, that each resin is typically used at; i.e. 3mm, 10mm and 50mm.

See below for more information.

View products
Sale!
Calibrated Mixing Cups
€1.28 – €1.98 (ex vat)

These re-usable, calibrated mixing cups are ideal for mixing GlassCast epoxy resins that require a mix ratio by volume – such as GlassCast 10 and GlassCast 50. Even when weighing your resin out, they are still a handy reusable pot for mixing resin.

Please note: these containers are available for collection only.

Select options
Sale!
Calibrated Containers
€1.68 – €4.95 (ex vat)
Perfect for measuring small amounts of Catalyst (Hardener) into Polyester or Epoxy Resins / Topcoats / Gelcoat. Self Releasing – Can be re-used.
- Conforms to ISO 7056 – 1981 (E) and BS 5404 Part 1.
- Strong & flexible Polypropylene.
- High translucency
- Permanent graduations are moulded in for reproducibility.
- Excellent chemical resistance.
- Ideal for repair or laminating small areas
Select options
Sale!
Summer Catalyst
€2.21 – €21.32 (ex vat)

All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.

Select options
Talc Fillers
€2.50 – €39.80 (ex vat)

Talc is an all-purpose inexpensive filler powder which is used to make resin into a bodyfiller. Also used in resin casting to reduce cost, shrinkage and heat generated by resin curing. Catalyst should be added before filler powder. Dark grey in colour.

Select options
Fillite
€2.50 – €35.80 (ex vat)

An excellent lightweight filler consisting of tiny hollow microspheres. Good for initial filling of large areas and easier than talc to sand down. Resin dramatically increases in volume when mixed with fillite. Also used for bedding down timber and steel ribs to the laminate.

Select options
Sale!
Masking Tape For Decorating & Building Projects
€2.65 (ex vat)
Masking Tape Of Top Quality For Building & Decorating

General purpose masking tape, suitable for all kinds of jobs in the Building, Industrial, and DIY sectors.
- Compatible with Most Common Paints & Lacquers
- Good Adhesion on All Surfaces even on irregular substrates.
- Easy Removal without Adhesive Residue (remove within 36 hours)
- Hand Tearable
- Saturated Paper Backing
- Synthetic Rubber Adhesive
- 50mm (2”) wide x 50mts length
- Sold per single roll.
Read more
Sale!
Winter Catalyst
€3.84 – €37.09 (ex vat)

Winter Catalyst (HBO-50) has been specifically designed for addition to CrysticCOOL Cure Resin and topcoats to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. It can also be added to other polyester resins / Gelcoats and Topcoats – but it will be similar to the summer catalyst cure times. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.

Select options
Sale!
Celz Silicone Oil 50ml for GlassCast Epoxy Resins
€4.12 (ex vat)

High quality silicone cell dispersion media for use in epoxy resin art to create amazing cells and lacing effects

Read more
Sale!
PaiBoat NW1 Cutting Compound
€6.76 – €19.76 (ex vat)

Advanced, fast cutting polishing compound developed specifically for tough plastics like cured epoxy resin.

This high-tech polishing compound will cut faster and take the surface of your cured epoxy resin from a 1200 grit paper finish to a high level of gloss either by hand or using a power polisher.

Select options
165gm Surfboard Fabric
€6.98 – €8.95 (ex vat)

Perfect for sheathing Surfboards / Dinghys / Canoes / Model Building / Aviation. There are various other Fabrics available – Unidirectional / Biaxial / Quad axial / Double Biax stitched – Please contact us on 00353 1 466 3786

Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

Select options
Sale!
PaiBoat Topfinish 2 Polish
€7.42 – €23.98 (ex vat)

Advanced, fast cutting polishing compound developed specifically for tough plastics like cured epoxy resin.

This high-tech polishing compound will cut faster and take the surface of your cured epoxy resin from a 1200 grit paper finish to a high level of gloss either by hand or using a power polisher.

Select options
Sale!
210gm Glass Cloth (twin weave)
€7.96 – €9.91 (ex vat)

For use in general sheathing work, more common with model makers. Twill weave has good drapability, it is also a very soft cloth that will laminate into awkward shapes and tight corners.

Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

Select options
Sale!
Resin Barrier/ Release Tape
€12.35 – €19.85 (ex vat)

This special high quality tape is designed specifically for use as a barrier or release tape for industrial resins like epoxy. It is smooth, very strong, non-stretch and totally non-stick for epoxy resin making it incredibly useful for a wide range of epoxy resin applications.

Select options
Sale!
Clear Polyester Gelcoat
€12.50 – €174.96 (ex vat)

High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.

Select options