Uncategorized

Showing 17–32 of 72 results

  • Sale!

    Clear Polyester Topcoat

    13.86189.62 (ex vat)

    Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. – Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale!

    Precision Mini Scale

    14.86 (ex vat)

    Precision Mini Scale

    Mini digital scale with extra accuracy down to 0.1g specially for weighing smaller quantities of resins, hardeners and pigments where extra accuracy is needed.

    Perfect for jewellery makers, model-makers and in fact anyone generally working with smaller quantities of resins and pigments!

  • Sale!

    White Polyester Gelcoat

    14.87183.45 (ex vat)

    High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please NoteCatalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.

  • Sale!

    White Polyester Topcoat

    14.95196.80 (ex vat)

    Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale! 6 Neon Pigments

    Neon Tinting Pigments for GlassCast Epoxy Resin

    15.88 (ex vat)

    Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.

    Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.

    The pigments can only be sold in a pack of 6 Neon colours;

    Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange

    Read more
  • Sale!

    10kg Digital Scale

    17.82 (ex vat)

    These high capacity, high accuracy electronic digital scales are perfect for measuring GlassCast Resin and Hardener to the correct mix ratio.

  • Sale!

    Easy Composites EL2 Epoxy Resin (Laminating Resin)

    18.85129.65 (ex vat)

    EL2 is a high performance epoxy laminating resin suitable for hand-layup of reinforcements such as carbon fibre, aramid and glass fibre. Its combination of mechanical performance, fast wet-out, easy handling and great value make EL2 a hugely popular choice in motorsport, boat-building, model-making and general composites.

    Sold as a kit (kit weight = combined weight of resin and hardener). Available to buy online in 500g, 1kg & 5kg kits.

  • Sale!

    G275 External 90 degree Angle Trim (200mm x 75mm)

    18.9220.68 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    The G range of external trims have the finished face on the outer face. The trims should be nailed, any joints/nail heads taped and resin covered as per usual.

    • G150 – 75mm x 75mm (Standard and in stock)
    • G275 – 200mm x 75mm (in stock – this is what we will ship)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    H275 Internal Angle Trim (200mm x 75mm)

    18.9220.68 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    The H range of internal trims have the finished face on the inner face. The trims should be nailed, any joints/nail heads taped and resin covered as per usual.

    • H150 – 75mm x 75mm (Standard and in stock)
    • H275 – 200mm x 75mm (in stock – this is what will be delivered)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs) or you could organise collection yourself.

  • Sale!

    GlassCast 10 Clear Casting Resin – Jewellery/ 3D Art/ Pen Blanks/ Clear Casting into Moulds

    19.87567.36 (ex vat)

    GlassCast® 10 is a water-clear, UV resistant epoxy casting resin suitable for castings and deep coatings up to 10mm in thickness. It is recommended for clear jewellery resin casting, 3D resin art, encapsulation and filling holes and gaps in wood (up to 10mm) and can be cast in multiple layers to an unlimited depth*. Open surface will require polishing. You could also add some Colour Pigments  (TranslucentSolid, Metallic, Silicone, Pinata, or Neon) to enhance your project.

    Suggested uses;

    • Clear or tinted resin jewellery / paperweights.
    • Resin & wood jewellery / walking stick handles and furniture pieces.
    • 3D resin art / Pen Blanks
    • Thick counter-tops (with embedded objects)
    • Water effects for models / scenarios

    How much resin will I need?

    Check out our GlassCast 10 Calculator to work out how much materials you will need for your project.

    See full details, including some Video’s below;

    Limited stock available. Please call us on 01 466 3786 to enquire.

  • Sale!

    GlassCast 50 Clear Casting Resin – River Tables/ Wood Turning-Bowls/ Large Jewellery

    19.87567.36 (ex vat)

    GlassCast® 50 is the remarkable new water-clear epoxy casting resin from the makers of the famous GlassCast product. GlassCast 50 is perfect for creating thick, water-clear, bubble-free castings up to 25mm deep. It is especially recommended for river tables, knot filling and other furniture projects where you will be casting a very thick layer of resin (up to 25mm per pour) and require the best clarity. It can be layered to create deep castings of unlimited depth. You could also add some Colour Pigments  (Translucent, Solid, Metallic, Silicone Oil, Pinata, or Neon) to enhance your project.

    Suggested uses:

    • River tables / knot holes
    • Wood and resin combination furniture (lamps, sculptures)
    • Clear castings / sculptures / Encapsulations / Paperweights

    How much resin will I need?

    Check out our GlassCast 50 Calculator to work out how much materials you will need for your project.

    See full details, including some excellent Video’s from our supplier and John Mc Grath below;

     

    Limited stock available. Please call us on 01 466 3786 to enquire.

  • Sale!

    Dispenser – 50ml Twin Tube Cartridge Gun

    19.88 (ex vat)

    50ml twin cartridge dispenser gun suitable for all our 50ml Permabond (ET500 Epoxy adhesive, as well as most other 50ml 1:1 twin-tube adhesive cartridges. Normally used together with disposable static mixer nozzles, sold separately.

    Read more
  • Sale!

    ET500 Structural Epoxy Adhesive

    28.76 (ex vat)

    ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive. ET500 has very good bond strength to a wide variety of substrates including metals, composites, wood, ceramics and some plastics.

    5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener).

  • Sale!

    Polypropylene Sheet – 100 x 100cm

    29.89 (ex vat)

    Polypropylene plastic sheet is ideal for use as a non-stick baseboard or barriers for your GlassCast epoxy resin projects. It has a smooth finish and is easy to cut and bond. Use it to create a base or sides for a river table or custom shaped containers for jewellery or wood turning projects.

  • Sale!

    Petri Dish Art Starter Kit

    49.60 (ex vat)

    Create your own stunning petrified rainbows with the Petri Dish Art Starter Kit in the form of coasters or mini pieces of art! This kit includes everything you need for this project – epoxy resin, alcohol inks, mould and accessories.

    Read more
  • Sale!

    G4 Dampseal

    59.75 (ex vat)

    A moisture curing single part polyurethane varnish ideal for sealing damp porous surfaces prior to using release agent. Used as damp proof floor sealing, pond sealing, sealing concrete prior to GRP sheathing where alkali in concrete can react with resins. Also used to improve the bond of GRP to metal.