Uncategorized
Showing all 58 results
-
Dispensing Gun Crestabond Bonding Agent
Co-Axial Cartridges Manual Bi-Mixer Applicator
- Manual bi-mixer applicator for co-axial cartridges (Crestabond)
- For use with 380ml co-axial cartridges
- Ideal for use where there is no access to compressed air
- This range comprises simple budget tools through to the most powerful hand applicators available.CM 380/10 for 10:1 co-axial cartridges
-
Sale!
Summer Catalyst
€2.21 – €21.32 (ex vat)All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.
-
Talc Fillers
€2.50 – €39.80 (ex vat)Talc is an all-purpose inexpensive filler powder which is used to make resin into a bodyfiller. Also used in resin casting to reduce cost, shrinkage and heat generated by resin curing. Catalyst should be added before filler powder. Dark grey in colour.
-
Fillite
€2.50 – €35.80 (ex vat)An excellent lightweight filler consisting of tiny hollow microspheres. Good for initial filling of large areas and easier than talc to sand down. Resin dramatically increases in volume when mixed with fillite. Also used for bedding down timber and steel ribs to the laminate.
-
Sale!
Masking Tape For Decorating & Building Projects
€2.65 (ex vat)Masking Tape Of Top Quality For Building & Decorating
General purpose masking tape, suitable for all kinds of jobs in the Building, Industrial, and DIY sectors.
- Compatible with Most Common Paints & Lacquers
- Good Adhesion on All Surfaces even on irregular substrates.
- Easy Removal without Adhesive Residue (remove within 36 hours)
- Hand Tearable
- Saturated Paper Backing
- Synthetic Rubber Adhesive
- 50mm (2”) wide x 50mts length
- Sold per single roll.
-
Sale!
Winter Catalyst
€3.84 – €37.09 (ex vat)Winter Catalyst (HBO-50) has been specifically designed for addition to CrysticCOOL Cure Resin and topcoats to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. It can also be added to other polyester resins / Gelcoats and Topcoats – but it will be similar to the summer catalyst cure times. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.
-
165gm Surfboard Fabric
€6.98 – €8.95 (ex vat)Perfect for sheathing Surfboards / Dinghys / Canoes / Model Building / Aviation. There are various other Fabrics available – Unidirectional / Biaxial / Quad axial / Double Biax stitched – Please contact us on 00353 1 466 3786
Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.
-
Sale!
210gm Glass Cloth (twin weave)
€7.96 – €9.91 (ex vat)For use in general sheathing work, more common with model makers. Twill weave has good drapability, it is also a very soft cloth that will laminate into awkward shapes and tight corners.
Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.
-
Sale!
Clear Polyester Gelcoat
€12.50 – €174.96 (ex vat)High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.
-
Sale!
Clear Polyester Topcoat
€13.86 – €189.62 (ex vat)Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
White Polyester Gelcoat
€14.87 – €183.45 (ex vat)High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please Note: Catalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.
-
Sale!
White Polyester Topcoat
€14.95 – €196.80 (ex vat)Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
Easy Composites EL2 Epoxy Resin (Laminating Resin)
€18.85 – €129.65 (ex vat)EL2 is a high performance epoxy laminating resin suitable for hand-layup of reinforcements such as carbon fibre, aramid and glass fibre. Its combination of mechanical performance, fast wet-out, easy handling and great value make EL2 a hugely popular choice in motorsport, boat-building, model-making and general composites.
Sold as a kit (kit weight = combined weight of resin and hardener). Available to buy online in 500g, 1kg & 5kg kits.
-
Sale!
ET500 Structural Epoxy Adhesive
€28.76 (ex vat)ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive. ET500 has very good bond strength to a wide variety of substrates including metals, composites, wood, ceramics and some plastics.
5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener).
-
Sale!
Petri Dish Art Starter Kit
€49.60 (ex vat)Create your own stunning petrified rainbows with the Petri Dish Art Starter Kit in the form of coasters or mini pieces of art! This kit includes everything you need for this project – epoxy resin, alcohol inks, mould and accessories.
-
Sale!
G4 Dampseal
€59.75 (ex vat)A moisture curing single part polyurethane varnish ideal for sealing damp porous surfaces prior to using release agent. Used as damp proof floor sealing, pond sealing, sealing concrete prior to GRP sheathing where alkali in concrete can react with resins. Also used to improve the bond of GRP to metal.
-
Sale!
5sq meter Fibreglass Roofing Kit (medium duty)
€145.53 (ex vat)Kit Contents:
- 6kgs Polyester Resin (Lloyd’s Approved)
- 5 meters 450gm/m2 Chopped Mat (medium duty)
- 2.5kgs Polyester (dark grey) Roofing Topcoat
- 400gm Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
5sq meter Fibreglass Roofing Kit (heavy duty)
€155.66 (ex vat)Kit Contents:+
- 7.5kgs Polyester Resin (Lloyd’s) Approved
- 5 meters 600gm/m2 Chopped Mat (heavy duty)
- 2.5kgs Polyester (dark grey) Roofing Topcoat
- 500gm Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
10sq meter Fibreglass Roofing Kit (medium duty)
€272.72 (ex vat)Kit Contents:
- 12kgs Polyester Resin (Lloyd’s approved)
- 10 meters 450gm/m2 Chopped Mat
- 5kgs Polyester (dark grey) Roofing Topcoat
- 800gm Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
10sq meter Fibreglass Roofing Kit (heavy duty)
€295.89 (ex vat)Kit Contents:
- 15kgs Polyester Resin (Lloyd’s) Approved
- 10 meters 600gm/m2 Chopped Mat
- 5kgs Polyester (dark grey) Roofing Topcoat
- 1lt Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
15sq meter Fibreglass Roofing Kit (medium duty)
€376.63 (ex vat)Kit Contents:
- 18kgs Polyester Resin (Lloyds Approved)
- 15 meters 450gm/m2 Chopped Mat
- 7.5kgs Polyester (dark grey) Roofing Topcoat
- 1.2lt Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
15sq meter Fibreglass Roofing Kit (heavy duty)
€418.35 (ex vat)Kit Contents:
- 22.5kgs Polyester Resin (Lloyd’s Approved)
- 15 meters 600gm/m2 Chopped Mat
- 7.5kgs Polyester (dark grey) Roofing Topcoat
- 1.25lt Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
20sq meter Fibreglass Roofing Kit (medium duty)
€453.38 (ex vat)Kit Contents:
- 24kgs Polyester Resin (Lloyds Approved)
- 20 meters 450gm/m2 Chopped Mat
- 10kgs Polyester (dark grey) Roofing Topcoat
- 1.5lt Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
20sq meter Fibreglass Roofing Kit (heavy duty)
€523.95 (ex vat)Kit Contents:
- 30kgs Polyester Resin (Lloyd’s Approved.
- 20 meters 600gm/m2 Chopped Mat
- 10kgs Polyester (dark grey) Roofing Topcoat
- 1.5lt Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
25sq meter Fibreglass Roofing Kit (medium duty)
€531.23 (ex vat)Kit Contents:
- 30kgs Polyester Resin (Lloyds Approved)
- 25 meters 450gm/m2 Chopped Mat
- 12.5kgs Polyester (dark grey) Roofing Topcoat
- 1.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
25sq meter Fibreglass Roofing Kit (heavy duty)
€599.95 (ex vat)Kit Contents:
- 37.5kgs Polyester Resin (Lloyd’s Approved)
- 25 meters 600gm/m2 Chopped Mat
- 12.5kgs Polyester (dark grey) Roofing Topcoat
- 2kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
30sq meter Fibreglass Roofing Kit (medium duty)
€615.86 (ex vat)Kit Contents:
- 36kgs Polyester Resin (Lloyd’s Approved)
- 30 meters 450gm/m2 Chopped Mat
- 15kgs Polyester (dark grey) Roofing Topcoat
- 2.25kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof willprovide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
30sq meter Fibreglass Roofing Kit (heavy duty)
€675.12 (ex vat)Kit Contents:
- 45kgs Polyester Resin (Lloyd’s Approved).
- 30meters 600gm/m2 Chopped Mat
- 15kgs Polyester (dark grey) Roofing Topcoat
- 2.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof willprovide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
35sq meter Fibreglass Roofing Kit (medium duty)
€731.28 (ex vat)Kit Contents:
- 42kgs Polyester Resin (Lloyd’S Approved)
- 35 meters 450gm/m2 Chopped Mat
- 17.5kgs Polyester (dark grey) Topcoat
- 2.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
40sq meter Fibreglass Roofing Kit (medium duty)
€794.03 (ex vat)Kit Contents:
- 48kgs Polyester Resin (Lloyd’s)
- 40 meters 450gm/m2 Chopped Mat
- 20kgs Polyester (dark grey) Topcoat
- 2.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
35sq meter Fibreglass Roofing Kit (heavy duty)
€796.46 (ex vat)Kit Contents:
- 50kgs Polyester Resin
- 35 meters 600gm/m2 Chopped Mat
- 17.5kgs Polyester (dark grey) Roofing Topcoat
- 2.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
45sq meter Fibreglass Roofing kit (medium duty)
€872.31 (ex vat)Kit Contents:
- 54kgs Polyester Resin (Lyods Approved)
- 45 meters 450gm/m2 Chopped Mat
- 22.5kgs Polyester (dark grey) Topcoat
- 3kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
40sq meter Fibreglass Roofing Kit (heavy duty)
€877.87 (ex vat)Kit Contents:
- 60kgs Polyester Resin (Lloyds Approved)
- 40 meters 600gm/m2 Chopped Mat
- 20kgs Polyester (dark grey) Roofing Topcoat
- 3kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
45sq meter Fibreglass Roofing (heavy duty)
€952.13 (ex vat)Kit Contents:
- 70kgs Polyester Resin (Lloyd’s Approved)
- 45 meters 600gm/m2 Chopped Mat
- 22.5kgs Polyester (dark grey) Roofing Topcoat
- 3.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
50sq meter Fibreglass Roofing Kit (medium duty)
€963.97 (ex vat)Kit Contents:
- 60kgs Polyester Resin (Lloyd’s)
- 50 meters 450gm/m2 Chopped Mat
- 25kgs Polyester (dark grey) Roofing Topcoat
- 3.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
50sq meter Fibreglass Roofing Kit (heavy duty)
€1,050.98 (ex vat)Kit Contents:
- 80kgs Polyester Resin (Lloyd’s Approved).
- 50 meters 600gm/m2 Chopped Mat
- 25kgs Polyester (dark grey) Roofing Topcoat
- 4kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
55sq meter Fibreglass Roofing Kit (medium duty)
€1,075.92 (ex vat)Kit Contents:
- 66kgs Polyester Resin (Lloyd’s Approved)
- 55 meters 450gm/m2 Chopped Mat
- 27.5kgs Polyester (dark grey) Roofing Topcoat
- 4kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
55sq meter Fibreglass Roofing Kit (heavy duty)
€1,143.03 (ex vat)Kit Contents:
- 83kgs Polyester Resin (Lloyd’s Approved)
- 55 meters 600gm/m2 Chopped Mat
- 27.5kgs Polyester (dark grey) Roofing Topcoat
- 4.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
60sq meter Fibreglass Roofing Kit (medium duty)
€1,158.29 (ex vat)Kit Contents:
- 72kgs Polyester Resin (Lloyds Approved)
- 60 meters 450gm/m2 Chopped Mat
- 30kgs Polyester (dark grey) Roofing Topcoat
- 4kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
65 sq meter Fibreglass Roofing Kit (medium duty)
€1,252.32 (ex vat)Kit Contents:
- 78kgs Polyester Resin (Lloyd’s Approved)
- 65 meters 450gm/m2 Chopped Mat
- 47kgs Polyester (dark grey) Roofing Topcoat
- 4.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.0
-
Sale!
60sq meter Fibreglass Roofing Kit (heavy duty)
€1,254.52 (ex vat)Kit Contents:
- 90kgs Polyester Resin (Lloyd’s Approved).
- 60 meters 600gm/m2 Chopped Mat
- 30kgs Polyester (dark grey) Roofing Topcoat
- 5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
65sq meter Fibreglass Roofing Kit (heavy duty)
€1,325.61 (ex vat)Kit Contents:
- 98kgs Polyester Resin (Lloyd’s Approved)
- 65meters 600gm/m2 Chopped Mat
- 32.5kgs Polyester (dark grey) Roofing Topcoat
- 5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
70 sq meter Fibreglass Roofing Kit (medium duty)
€1,329.74 (ex vat)Kit Contents:
- 84kgs Polyester Resin (Lloyds Approved)
- 70 meters 450gm/m2 Chopped Mat
- 35kgs Polyester (dark grey) Roofing Topcoat
- 5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
70sq meter Fibreglass Roofing Kit (heavy duty)
€1,384.17 (ex vat)Kit Contents:
- 105kgs Polyester Resin (Lloyd’s Approved)
- 70meters 600gm/m2 Chopped Mat
- 35kgs Polyester (dark grey) Roofing Topcoat
- 5.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
75 sq meter Fibreglass Roofing Kit (medium duty)
€1,436.60 (ex vat)Kit Contents:
- 90kgs Polyester Resin (Lloyd’s Approved)
- 75 meters 450gm/m2 Chopped Mat
- 37.5kgs Polyester (dark grey) Roofing Topcoat
- 5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
75sq meter Fibreglass Roofing Kit (heavy duty)
€1,476.61 (ex vat)Kit Contents:
- 113kgs Polyester Resin (Lloyd’s Approved)
- 75 meters 600gm/m2 Chopped Mat
- 37.5kgs Polyester (dark grey) Roofing Topcoat
- 6kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
80 sq meter Fibreglass Roofing Kit (medium duty)
€1,497.10 (ex vat)Kit Contents:
- 96kgs Polyester Resin (Lloyd’s Approved)
- 80 meters 450gm/m2 Chopped Mat
- 40kgs Polyester (dark grey) Roofing Topcoat
- 5.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
80sq meter Fibreglass Roofing Kit (heavy duty)
€1,563.32 (ex vat)Kit Contents:
- 120kgs Polyester Resin (Lyod’s Approved
- 80meters 600gm/m2 Chopped Mat
- 40kgs Polyester (dark grey) Roofing Topcoat
- 6.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
85 sq meter Fibreglass Roofing Kit (medium duty)
€1,598.54 (ex vat)Kit Contents:
- 102kgs Polyester Resin Lloyd’s Approved)
- 85 meters 450gm/m2 Chopped Mat
- 42.5kgs Polyester (dark grey) Roofing Topcoat
- 6kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
85sq meter Fibreglass Roofing Kit (heavy duty)
€1,646.10 (ex vat)Kit Contents:
- 128kgs Polyester Resin (Lloyd’s Approved)
- 85meters 600gm/m2 Chopped Mat
- 42.5kgs Polyester (dark grey) Roofing Topcoat
- 7kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
90 sq meter Fibreglass Roofing Kit (medium duty)
€1,667.39 (ex vat)Kit Contents:
- 108kgs Polyester Resin (Lloyd’s Approved)
- 90 meters 450gm/m2 Chopped Mat
- 45kgs Polyester (dark grey) Roofing Topcoat
- 6kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
90 sq meter Fibreglass Roofing Kit (heavy duty)
€1,730.41 (ex vat)Kit Contents:
- 135kgs Polyester Resin (Lloyd’s Approved)
- 90meters 600gm/m2 Chopped Mat
- 45kgs Polyester (dark grey) Roofing Topcoat
- 7.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
95sq meter Fibreglass Roofing Kit (medium duty)
€1,737.64 (ex vat)Kit Contents:
- 114kgs Polyester Resin (Lloyd’s Approved)
- 95 meters 450gm/m2 Chopped Mat
- 47.5kgs Polyester (dark grey) Roofing Topcoat
- 6.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
95 sq meter Fibreglass Roofing Kit (heavy duty)
€1,791.17 (ex vat)Kit Contents:
- 143kgs Polyester Resin (Lloyd’s Approved)
- 95meters 600gm/m2 Chopped Mat
- 47.5kgs Polyester (dark grey) Roofing Topcoat
- 7.5kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
-
Sale!
100sq meter Fibreglass Roofing Kit (medium duty)
€1,845.86 (ex vat)Fibreglass Roofing Kit Contents:
- 120kgs Polyester Resin (Lloyd’s Approved)
- 100 meters 450gm/m2 Chopped Mat
- 50kgs Polyester (dark grey) Roofing Topcoat
- 7kg Catalyst
This Fibreglass kit provides sufficient resin/topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installing correctly, your roof will provide you with long-term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Toolkit pack.
For General Health Information see section on hazards.
-
Sale!
100 sq meter Fibreglass Roofing Kit (heavy duty)
€1,868.10 (ex vat)Kit Contents:
- 150kgs Polyester Resin (Lloyd’s Approved)
- 100 meters 600gm/m2 Chopped Mat
- 50kgs Polyester (dark grey) Roofing Topcoat
- 8kg Catalyst
This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.
The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.
To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.
For General Health Information see section on hazards.
