Sale!
6 Neon Pigments

Neon Tinting Pigments for GlassCast Epoxy Resin

17.23 15.88 (ex vat)

Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.

Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.

The pigments can only be sold in a pack of 6 Neon colours;

Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange

Description

Resin Compatibility

These translucent pigments are ideal as:

  • Polyurethane resin tints (such as our Waterclear Polyurethane Casting Resin)
  • Waterclear polyester resin tints (such as our Waterclear Polyester Casting Resin)
  • Epoxy resin tints (such as our Epoxy Coating Resin and Epoxy Laminating Resin)
  • Casting Resin Tints

They have been tested with products from our own range but should also work well with resins from other manufacturers however you should always conduct your own tests as to their compatibility with other resin systems.

How to Use

As stated above, when ‘tinting’ clear resins the key is to use only a tiny amount of these translucent pigments. 1 droplet is enough to pigment around 20-40g of resin, depending on how strong you want the colour tint to be.

Remember that thicker castings will require a lower percentage of pigment because the tint will appear stronger the thicker the section is. Conversely, thinner castings will require a higher percentage of pigment in order to appear to be the same colour as thicker castings.

Tinting Mix Ratio Table

Only a tiny drop of these specially developed pigments is needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin. In fact, a subtle tinting effect can be achieved with less than 0.0004% (1 droplet in a 35g casting) and so each bottle is capable of tinting 40kgs of resin! ince most electronic scales are incapable of the accuracy required to measure pigment ratios of around 0.005% we would suggest using the table on the specification tab as a guide but in all cases experimenting yourself adding a tiny amount of pigment at a time until you achieve the desired level of tint:

Dispersing the Pigment

The pigments disperse very quickly into epoxy resin and polyurethane resin. When using the pigments to tint larger quantities of polyester resin it is recommended to make a resin ‘dispersion’ by mixing the pigment into a small amount of the resin first and then mixing the small pigmented batch of resin into the larger batch to aid distribution of the pigment throughout the resin.

When pigmenting more reactive materials such as fast curing polyurethanes you will find it helpful to mix the pigment into one side of the resin (either part A or part B) thoroughly before mixing the two parts together and starting the reaction. This allows as much time as is needed to thoroughly disperse the pigment before starting the reaction. If you do choose to pigment just one side of the resin first it’s helpful to remember that the addition of the second half of the resin will ‘dilute’ the tint when you add it.

Additional information

Weight .5 kg

Data Sheet

Safety Data Sheet: EC-SDS-Translucent-Tinting-Pigments

Delivery

Please Note: We only deliver our goods to the Republic of Ireland and Northern Ireland.

We do not deliver to England, Wales, Scotland, Europe or any other areas of the World.

Orders can also be collected from our premises in Dublin. Please view our Find Us page for our exact location.

The cost of delivery is calculated at checkout, it is based on your location, the weight and size of your order and its hazardous classification. The amount will be shown before you commit to payment.

This product is safe for all forms of transport when sold on its own. No restrictions apply. However, if your basket includes any of the Epoxy products the following applies;

Delivery is normally to your door by a tracked courier or Haz-Chem truck driver. If you have any concerns about your delivery, please contact us and we will give you its tracking number, website address and delivery details or in the case of the Haz-Chem we will contact them on your behalf.

The earlier in the day we receive your order (closing time is 12 midday) the better chance we have of dispatching it on the same day. Bulk deliveries will be dispatched via a specialized Dangerous Goods Haulier. Delivery times will depend on your location. Please contact us on +353 (1) 466 3786 for exact times and costs.

All carriers require a contact phone number for the consignment as this avoids non delivery of the goods.

Please note packages must be signed for upon delivery, they cannot be left without a signature unless arranged beforehand with our team. Delivery is made Monday – Friday between the hours of 9am-5pm

We have a proven track record in attending to customers orders efficiently.

Non-Hazardous, Hazardous, Limited Quantity

All products on the site have a classification of either Non-Hazardous, Hazardous or Limited Quantity. Non-Hazardous are products such as Fibreglass mat/fabrics, refills, rollers, brushes, tape, etc. Hazardous products contain large amounts of resin, acetone, catalyst, and certain kit sizes. Most other products are classified as being Limited Quantity i.e. they may contain small amounts of Resin, Catalyst and Acetone.

Return goods Policy:

  1. Claims in respect of damaged goods, short deliveries etc. must be made in writing three days of receipt of goods.
  2. Returns after a period of one month shall not be accepted.
  3. Returning the goods is at your own expense and is non-refundable.
  4. There will be a handling charge of 15% on all returned goods.
  5. Any returns made within the specific period should be in a resalable condition.
  6. Specially ordered goods including Trims cannot be returned.  (We would ask all customers to carefully select your trims).
  7. Non-standard colours must be paid upfront prior to mixing and MID Glassfibre Supplies Ltd cannot accept any responsibility as to colour variations after the goods has been mixed. We also cannot accept any returns.
  8. Goods ordered or received in error must be notified to us in writing within three days.
  9. All goods are subject to our Terms & Conditions.

No FAQ Found

You may also like…