Polyester + Epoxy Filler – Colloidal Silica 250gm

16.50 (ex vat)

Colloidal Silica is a feather weight thixotropic powder, which is used to thicken resin & gelcoat and for bonding & filleting applications.

By adding colloidal silica powder in varying amounts to a resin mix containing the other filler types mentioned, the handling and flow characteristics can be controlled. Relatively small quantities added to a resin mix containing glass bubbles or microballoons will give non-sag properties and impart easier handling.

Colloidal silica is also used with microfibres to produce a mix suitable for use as a high strength, non-sagging structural adhesive, particularly for non-absorbent materials such as grp. The inclusion of colloidal silica has the effect of increasing the hardness of the resulting mix which will create more difficulty when sanding. For this reason colloidal silica is usually added in the minimum quantities to any mix for which sanding is anticipated. In some applications this feature can be used to an advantage, for example to create a hard wearing edge or surface. For General Health Information see section on hazards.

Technical Details;
Composition: Silicon dioxide / Appearance: White powder

Particle Size: 0.012 microns / Bulk Density: 50g/litre approx.

Colloidal Silica + Microballoons + Epoxy Resin = Fill / Fairing Mix (Above Water)

Colloidal Silica + Glass Bubbles + Epoxy Resin = Fill / Fairing Mix (Below Water)

Colloidal Silica + Micro Fibres + Epoxy Resin = Adhesive Mix

Colloidal SIlica + Epoxy Resin = Thickened Resin Mix

SKU: 250gm colloidal silica Categories: ,

You may also like…

  • Slip Resistant Topcoat

    0.00 (ex vat)
    Read more
  • Nitrile Gloves (XL) Box of 100

    12.95 (ex vat)
    Add to basket