Shop

Showing all 209 results

  • 600/300gm Combination Mat (1.25mt wide)

    0.0012.95 (ex vat)

    Fabric consisting of 600g bi-directional Woven Roving stitched with Polyester Yarn to 300gm Chopped Strand Mat. Used for building layers rather than individual materials separately. Extremely Strong and time saving.

    Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

     

  • 600gm Woven Roving

    0.008.50 (ex vat)

    Glass fibre filaments, spun into a yarn then woven to make a cloth. It provides great strength with minimal thickness. Used as an alternate layer between Chopped Mat. Easy to wet out and drapes well.

    Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

  • Chopping Rovings (per 20kg roll)

    Used for spray laminating, the continuous roving is chopped in the spray gun & deposited together with resin on the mould. Available in rolls of approx. 20kgs

    Read more
  • clear-polyester-gelcoat-5kg

    Coloured Gelcoat

    0.00 (ex vat)

    Coloured Gelcoat to RAL 840 Colours – Available in 0.5kg/ 1kg/ 2.5kg/ 5kgs/ 20kgs. Please phone 00353 1 466 3786 for availability and price. Please NoteCatalyst (hardener) must also be added to the Topcoat in order for it to cure.For General Health Information see section on hazards.

    Please contact the office on 01 466 3786 if you require coloured Gelcoat.

    Read more
  • polyester-topcoat-5kg

    Coloured Topcoat

    0.00 (ex vat)
    Read more
  • polyester-topcoat-5kg

    Slip Resistant Topcoat

    0.00 (ex vat)

    Similar to Flocoat but with the addition of a slip resistant finish. The flocoat can be applied to an area where a degree of slip resistance is required i.e. Decks and walkways of Roofs/ Balconies/ Boats & Steps. Available in a variety of colours. Please phone 00353 1 4663786 for availability and price. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Read more
  • Polyester-Resin-5kg.png

    Special Purpose Resins

    0.00 (ex vat)

    Isophthalic and Vinyl ester Resin – Chemical Resistant resin – Fire retardant resin – Please contact us on +353 1 466 3786 for price and availability.

    Add to basket
  • Coremat

    0.00 (ex vat)

    Coremat is a polyester nonwoven that contains microspheres and is used as a thin core (bulker mat) or print blocker (liner) in fibre reinforced laminates, manufactured in Hand Lay-Up or Spray-Up processes. Coremat should always be fully impregnated with resin and the microspheres in Coremat prevent excessive resin up-take. Please contact us on +353 1 466 3786 for price and availability.

    Add to basket
  • Core-Cell®

    0.00 (ex vat)

    Core-Cell® is the leading structural foam core material, which has become widely accepted for the construction of large, high performance structures. Please contact us on +353 1 466 3786 for price and availability.

    Read more
  • Colour Chart & Pigments

    0.00 (ex vat)
    Read more
  • Dispensing Gun Crestabond

    Dispensing Gun Crestabond Bonding Agent

    Co-Axial Cartridges Manual Bi-Mixer Applicator

    • Manual bi-mixer applicator for co-axial cartridges (Crestabond)
    • For use with 380ml co-axial cartridges
    • Ideal for use where there is no access to compressed air
    • This range comprises simple budget tools through to the most powerful hand applicators available.CM 380/10 for 10:1 co-axial cartridges

     

    Read more
  • Choose your GlassCast Resin

    If you’re reading this then you’ve probably already joined the many thousand professionals and serious hobbyists who have chosen GlassCast clear epoxy resin for their creative projects but you maybe don’t feel 100% sure which GlassCast resin you need… This page is here to help!

    There are currently three resins in the GlassCast range; GlassCast 3, GlassCast 10 and GlassCast 50. The numbers relate to the thickness, in millimetres, that each resin is typically used at; i.e. 3mm, 10mm and 50mm.

    See below for more information.

  • Sale!

    Glassfibre Tape (Woven Fabric)

    0.4975.00 (ex vat)

    Open Weave woven (180gm/m²) cloth in Tape form used for roof sealing the OSB timber joints / edging trims / ‘stich and glue’ boat construction and wrapping around a repair to give a neater finish than standard CSM. Available per meter or per 50mt roll – widths 25mm (1″)/ 50mm (2″)/ 75mm (3″)/ 100mm (4″)/ 150mm (6″). A versatile material for many uses.

  • Sale!

    Wooden Mixing Sticks

    0.504.98 (ex vat)

    Wooden tongue depressors, approx 6″ (150mm) long, suitable for smaller mixes of Resin, Pigments and Flocoats.

  • Sale!

    Shoe Covers

    0.50 (ex vat)

    High quality overshoes
    • Elasticated for extra grip around shoes
    • Anti-slip textured surface at the bottom
    • Tear resistant
    • Waterproof
    • Ideal for interior work to protect carpets and flooring

    Sold: Pack of 5 pair

    Read more
  • Sale!

    Ear Plugs

    0.65 (ex vat)

     

    The soft polymer foam of these classic earplugs moulds comfortably to the shape of your ear canal, providing protection and an excellent seal against loud noise. They are also moisture resistant, providing ear protection even in hot and humid conditions. These earplugs conform to EN352-2 and are an essential item for noisy working environments. Attenuation detail: SNR=36dB – H=36dB, M=33dB, L=29dB.

    • Humidity absorption-resistant for use in moist conditions, flame-resistant.
    • Assumed protection at 8KHz-34dB.
    • Simplified noise level reduction 36dB.
    • Exposed surface texture resists movement and helps maintain an effective seal.
    • Sold – 1 pack of  two ear plugs.

     

    Add to basket
  • Sale!

    Plastic Containers

    0.986.95 (ex vat)

    Used for mixing resins / topcoats and for cleaning tools in acetone. Unaffected by resin and can be reused by “cracking out” old resin build up. Lids can be supplied separately. Available in various sizes – 250ml / 500ml / 1lt / 2.5lt / 5lt / 10lt / 20lt / 15lt Black.

  • Sale!

    Glassfibre Bandage (Chopped Strand)

    0.9818.76 (ex vat)

    75mm Chopped Strand Matting Bandage – 450g x 70m. Chopped Strand Mat in a bandage form is ideal for all bandaging and jointing requirements. Some of its uses are as follows;

    • Roofing – Taping joins in OSB or Plywood prior to the main lamination
    • Bandage all joints between trim sections and Roof decking.
    • Any detail work around pipes, Vents and Sky Lights.
    • used for selective reinforcement in the boat building, transport, agriculture and industrial composite industries
    • Sold by the roll or the Mt
  • Sale!

    Sandpaper Sheets

    1.05 (ex vat)

    80grit sand paper is used for sanding the cured fibreglass coat – to remove sharp strands and to abrade the surface prior to laying another layer of chopped strand mat or to painting the final Topcoat. Sold per sheet.

  • Sale!

    25mm Brush

    1.257.68 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Calibrated Mixing Cups

    1.281.98 (ex vat)

    These re-usable, calibrated mixing cups are ideal for mixing GlassCast epoxy resins that require a mix ratio by volume – such as GlassCast 10 and GlassCast 50. Even when weighing your resin out, they are still a handy reusable pot for mixing resin.

     

    Please note: these containers are available for collection only.

  • Sale!

    Spreader – Notched

    1.295.90 (ex vat)

    Simple, reusable resin spreader perfect for spreading GlassCast epoxy resin over artwork, countertops, bartops, tables, floors and more.

  • Sale!

    50mm Brush

    1.4313.20 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Calibrated Containers

    1.684.95 (ex vat)

    Perfect for measuring small amounts of Catalyst (Hardener) into Polyester or Epoxy Resins / Topcoats / Gelcoat.  Self Releasing – Can be re-used.

    • Conforms to ISO 7056 – 1981 (E) and BS 5404 Part 1.
    • Strong & flexible Polypropylene.
    • High translucency
    • Permanent graduations are moulded in for reproducibility.
    • Excellent chemical resistance.
    • Ideal for repair or laminating small areas
  • Sale!

    Disposable Chemical Resistant Gloves

    1.8014.98 (ex vat)

    Introducing the Microflex 93-260, the glove that’s changing the face of chemical hand protection. With an innovative three layer design, Microflex 93-260 offers the reliable protection workers need when handling chemicals.
    The glove’s unique, triple-layer construction features a soft interior specifically designed to enable easy donning and doffing. Its flexible middle layer delivers maximum protection against acids and bases, while the durable exterior delivers maximum protection against organic solvents.
    The Microflex 93-260 provides such tough chemical protection that it has met requirements for EN 374 certification in Europe. When tested against aggressive chemicals like Sulfuric Acid, N Heptane, Hexane and Methanol, the Microflex 93-260 demonstrates impressive permeation breakthrough times.
    Made with an innovative nitrile and neoprene composite material, the Microflex® 93-260 measures only 7.8 mil (0.19 mm) thick and delivers all the benefits of a single-use, splash resistant glove: exceptional comfort, fit, dexterity and grip.
    50 Gloves per box. Size:XL (9.5 – 10)

  • Sale!

    Disposable Mask

    1.89 (ex vat)

    PREMIUM FOLD FLAT P3 VENTED MASK

    • Adjustable nose bridge.
    • Space saving design.
    • Adjustable elastic straps.
    • Dolomite clogging tested, gives better breathing resistance and for a longer time period.
    • Easy breathe exhale valve.
    • Individually packed.
    • Fits neatly into a breast pocket.

    • Conforms to EN149:2001+A1:2009 FFP3 NR D

    For Hazard Type: Toxic dusts, fumes and water-based mists.
    Example: Working with hardwood, glass fibres and plastic (non PVC), metalwork and welding.

  • Sale!

    75mm Brush

    1.9417.50 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Plastic Stirrer

    1.95 (ex vat)

    Wipe Clean and Reuse • Approx 27.5cm x 2.7cm • Useful when mixing Resins & Topcoats

    Add to basket
  • Sale!

    150mm (6″) Roller Handle

    1.97 (ex vat)

    Roller frame to fit our 150mm push fit refills.

    Add to basket
  • 100mm (4″) Roller Handle

    1.98 (ex vat)

    Roller frame to fit our 100mm short or long hair push fit refills.

    Add to basket
  • Sale!

    100mm Brush

    2.1819.88 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Summer Catalyst

    2.2121.32 (ex vat)

    All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm.  For larger quantities, 2.5kg, 5kg & 25kg  please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.

  • Surface Tissue

    2.502.98 (ex vat)

    A Glassfibre tissue (35gm/m²) used for a final layer on top of Chopped Mat to obtain an improved finish. It is also used to improve chemical resistance on a gelcoat or topcoat surface, ensuring an even thickness, freedom from cracking, and a long life product – Or applied to dry Gelcoat to cover up the coarse glass pattern and form a smooth surface for the flowcoat to be applied. Uses 100g of resin per m². Supplied per meter / 1mt wide.

    Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

  • Talc Fillers

    2.5039.80 (ex vat)

    Talc is an all-purpose inexpensive filler powder which is used to make resin into a bodyfiller. Also used in resin casting to reduce cost, shrinkage and heat generated by resin curing. Catalyst should be added before filler powder. Dark grey in colour.

  • Placeholder

    Fillite

    2.5035.80 (ex vat)

    An excellent lightweight filler consisting of tiny hollow microspheres. Good for initial filling of large areas and easier than talc to sand down. Resin dramatically increases in volume when mixed with fillite. Also used for bedding down timber and steel ribs to the laminate.

  • Sale! Masking Tape

    Masking Tape For Decorating & Building Projects

    2.65 (ex vat)

    Masking Tape Of Top Quality For Building & Decorating 

    General purpose masking tape, suitable for all kinds of jobs in the Building, Industrial, and DIY sectors.

    • Compatible with Most Common Paints & Lacquers
    • Good Adhesion on All Surfaces even on irregular substrates.
    • Easy Removal without Adhesive Residue (remove within 36 hours)
    • Hand Tearable
    • Saturated Paper Backing
    • Synthetic Rubber Adhesive
    • 50mm (2”) wide x 50mts length
    • Sold per single roll.
    Read more
  • Sale! Plastic Squeeze Bottle

    Plastic Squeeze Bottle with Angled Straw

    2.984.87 (ex vat)

    Plastic Squeeze Bottle with Angled Straw for Dispensing Water

    Plastic wash bottles with Swan neck and a fine control tip. Ideal for washing down. Polypropylene screw closure with its angled stem and draw tube moulded in one piece for leak-proof applications

    Available in three sizes; 250ml, 500ml & 1000ml.

  • 225mm Long Hair Refills (Resin)

    3.754.40 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

  • Sale!

    Chopped Strand Mat 300gm

    3.76155.10 (ex vat)

    The most common fiberglass reinforcement used with Polyester resin for hand lay-up. The Glassfibre strands are randomly arranged and held together by an emulsion binder to form a mat. Available in various thickness 300gm /450gm (for Boat & general repairs) 600gm/m2 (recommended for Roofing) – approx 1mt wide. Chopped Mat lends itself to most laminating jobs including Boat Building / Roofing / Ponds / Car-Truck body repairs etc. Lloyds approved

    Please select quantity range from drop down menu (i.e. 1-4 mt) and enter the specific amount you wish to order in the box beside the ‘add to basket’ button.

  • Sale!

    Chopped Strand Mat 450gm

    3.76155.10 (ex vat)

    The most common fiberglass reinforcement used with Polyester resin for hand lay-up. The Glassfibre strands are randomly arranged and held together by an emulsion binder to form a mat. Available in various thickness 300gm /450gm (for Boat & general repairs) 600gm/m2 (recommended for Roofing) – approx 1mt wide. Chopped Mat lends itself to most laminating jobs including Boat Building / Roofing / Ponds / Car-Truck body repairs etc. Lloyds approved

     

    Please select quantity range from drop down menu (i.e. 1-4 mt) and enter the specific amount you wish to order in the box beside the ‘add to basket’ button.

  • Sale!

    Chopped Strand Mat 600gm

    3.76155.10 (ex vat)

    The most common fiberglass reinforcement used with Polyester resin for hand lay-up. The Glassfibre strands are randomly arranged and held together by an emulsion binder to form a mat. Available in various thickness 300gm /450gm (for Boat & general repairs) 600gm/m2 (recommended for Roofing) – approx 1mt wide. Chopped Mat lends itself to most laminating jobs including Boat Building / Roofing / Ponds / Car-Truck body repairs etc. Lloyds approved

    Please select quantity range from drop down menu (i.e. 1-4 mt) and enter the specific amount you wish to order in the box beside the ‘add to basket’ button.

  • Sale!

    Winter Catalyst

    3.8437.09 (ex vat)

    Winter Catalyst (HBO-50) has been specifically designed for addition to CrysticCOOL Cure Resin and topcoats to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. It can also be added to other polyester resins / Gelcoats and Topcoats – but it will be similar to the summer catalyst cure times. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm.  For larger quantities, 2.5kg, 5kg & 25kg  please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.

  • Sale!

    1 pair (XL) Rubber Glove

    3.85 (ex vat)

    Heavy duty flock lined natural rubber glove.

    Jet™ Black is a heavy duty flock lined rubber glove, offering good chemical and mechanical protection. This natural rubber glove performs well to protect against a wide range of chemicals and cleaning agents. Chlorinated to harden the surface, it is smooth to the touch and attains a good EN388 score for abrasion, making it extremely durable. The slip resistant pattern on the palm of the glove ensures good grip in both dry and wet conditions, and it has a beaded cuff to prevent liquid rollback. Its anatomical shape and flexibility minimise hand fatigue and the soft cotton flock lining absorbs perspiration keeping the hands cool and comfortable. Contains a fungicidal and bacteriostatic agent for hygiene.

     

    Add to basket
  • Sale!

    Trimming Knife

    3.95 (ex vat)

    This retractable trimming knife is simple to use and safe to store.

    • Durable aluminium body
    • Spare blade storage inside
    Add to basket
  • Sale!

    Safety Glasses

    3.98 (ex vat)

    • Wrap around spectacle.
    • Anti fog polycarbonate lens.
    • Scratch resistant.
    • Adjustable side arms.
    • Low impact & 99.9% UV protected.
    • Nylon frame.
    • Conforms to EN166 -1F.
    Read more
  • Sale!

    100mm x 17mm Mohair (Topcoat) Refill

    3.98 (ex vat)

    These short-pile refills are perfect for applying Flocoat/ Gelcoat & Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″ & 12″).

    Add to basket
  • Sale!

    100mm x 17mm Blue Stripe (Resin) Refill

    3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • Sale!

    230mm (9″Heavy duty) Roller Handle

    3.98 (ex vat)

    Heavy Duty Roller frame to fit our 225mm push fit refills.

    Add to basket
  • Sale!

    300mm (12″) Long Hair Refills (Resin)

    3.98 (ex vat)

    These Long-pile 300 x 45mm (12 x 1.75″) refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types.

    • Acetone resistant
    • Good all round pick-up, performance and coverage
    • Polyester will perform well in terms of Resin loading with minimum expenditure
    • For use with screw in 300mm (12″) Lugged Frame
    • Pro Fibreglass Extention Pole – 1200-2400cm (4-8′)
    Read more
  • Sale!

    Tray – Heavy duty mixing tray

    3.98 (ex vat)

    430mm (17″) Heavy duty plastic with ribbed interior to aid paint loading onto rollers.

    • Deeper tray for increased paint holding capacity.
    • Larger area reduces exothermic heat build up of resin’s which extends working time
    • Reusable – when substance is cured, just crack out the contents or clean with Acetone
    • Pouring spout
    • Please Note: Refill & Frame not included.
    Add to basket
  • Sale!

    Metallic Pigment Powders

    3.9849.80 (ex vat)

    High quality metallic-effect powder pigments for use with GlassCast® clear epoxy casting and coating resins. Adding just a few grams of these potent powders to your resin will create eye-catching shimmering colour effects which move and react in the light.

     

  • Sale!

    225mm (9″)Short Hair Refill (Flocoat/ Gelcoat)

    3.994.93 (ex vat)

    These rollers are made on 48mm diameter, polypropylene thermally bonded, acetone resistant core. Made from a velvet like polyester fibre woven into its backing for strength. This fabric will give a bubble free and fluff free finish when used for Gelcoat and Topcoat application. The 4″ and 6″ have a push on frame and the 9″ and 12″ have a cage frame for strength;

  • Sale! Silicone Oil

    Celz Silicone Oil 50ml for GlassCast Epoxy Resins

    4.12 (ex vat)

    High quality silicone cell dispersion media for use in epoxy resin art to create amazing cells and lacing effects

    Read more
  • Sale!

    150mm x 41mm Mohair (Topcoat) Refill

    4.35 (ex vat)

    These short-pile refills are perfect for applying Flocoat/ Gelcoat & Resins. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″ & 12″).

    Add to basket
  • Sale!

    150mm x 41mm Blue Stripe (Resin) Refill

    4.35 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • Sale!

    Hi-Viz Safety Vest

    4.35 (ex vat)

    This pre-packed multi-functional vest is high visibility with reflective tape on the shoulders, arms and body for added protection in poor lighting. It has 2 internal Velcro pockets and a front clear ID pocket for identity or business cards. Also features contrast colour edging and sewn-on loops for radios. Suitable for building sites, road working, walking, cycling and horse riding.      This product conforms to EN 471 Class 2.

    Add to basket
  • Sale!

    300mm (12″) Short Hair Refill (Topcoat/ Gelcoat)

    4.60 (ex vat)

    These Short-pile 300 x 45mm (12 x 1.75″) refill are perfect for applying Topcoat/ Gelcoat & Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types.

    • Acetone resistant
    • Good all round pick-up, performance and coverage
    • They will perform well in terms of Topcoat & Resin loading with minimum expenditure
    • For use with screw in 300mm (12″) Lugged Frame
    • Pro Fibreglass Extention Pole – 1200-2400cm (4-8′)
    Read more
  • Sale! Curl Pigments

    Solid Colour Pigments – 20ml

    4.656.98 (ex vat)

    Super-concentrated, solid colour liquid pigments used to add strong, vibrant, opaque colour to resin for projects including resin flow art, countertops, decorative flooring, wood inlays, resin castings and more. Just a single drop can create a see-through colour tint, whilst adding more pigment will create a solid colour – see below for more details.

  • Sale!

    Hand Sander

    4.85 (ex vat)

    Professional Hand Sander

    • For use with sandpaper when smoothing all surfaces.
    • The padded surface gives improved sanding of uneven and rough surfaces
    • Simple wing nut for easy tightening and release of sandpaper securing bar.
    • Made of strong lightweight aluminium with polypropylene handle.
    • Dimensions – 240mm x 84mm
    • Lightweight handle.
    • Ideal for large surfaces such as plaster and dry wall.
    Add to basket
  • Sale!

    Oversleeves

    4.88 (ex vat)

    Disposable Oversleeve. Elasticated both ends.

    Offering simple, effective protection, these over sleeves are great for splashes.

    Please note: these oversleeves are Non compliant and are not chemical resistant.

    Sold – pack of 100 pair.

    Read more
  • Sale!

    Bucket – 15lt Paint Scuttle

    5.87 (ex vat)

    Durable strong plastic with measuring scale.
    Ribbed interior to aid paint loading onto rollers.

    • Manufactured in strong, robust plastic
    • Capacity gradations included for easy measuring – Lt / Gal
    • 15lt (3 Gallon) capacity
    • Suitable for various sizes of refills
    • Strong steel hand
    • Reuasable
    Add to basket
  • Sale!

    Frame – 300mm (12″) Screw Frame for Fibreglass Pole & 300mm Refills

    5.96 (ex vat)

    One piece cast aluminium for strength and durability. Lugged fitting accepts 8mm end cap refills. Screw-fit extension pole connection. Suitable for;

    • 300mm (12″) Polyester & Epoxy Resins, Topcoat & Gelcoat
    • 1200 – 2400mm (4 x 8) Pro Fibreglass Extention Pole
    Add to basket
  • Sale!

    50mm x 15mm Laminating Roller

    5.99 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Paper Rolls

    6.50 (ex vat)

    Ideal for both light and medium duty wiping tasks.

    Add to basket
  • Sale!

    PaiBoat NW1 Cutting Compound

    6.7619.76 (ex vat)

    Advanced, fast cutting polishing compound developed specifically for tough plastics like cured epoxy resin.

    This high-tech polishing compound will cut faster and take the surface of your cured epoxy resin from a 1200 grit paper finish to a high level of gloss either by hand or using a power polisher.

  • 165gm Surfboard Fabric

    6.988.95 (ex vat)

    Perfect for sheathing Surfboards / Dinghy’s / Canoes / Model Building / Aviation. There are various other Fabrics available – Unidirectional / Biaxial / Quad axial / Double Biax stitched – Please contact us on 00353 1 466 3786

     

    Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

  • Sale!

    100mm x 21mm Laminating Roller

    7.12 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    70mm x 21mm Laminating Roller

    7.30 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    PaiBoat Topfinish 2 Polish

    7.4223.98 (ex vat)

    Advanced, fast cutting polishing compound developed specifically for tough plastics like cured epoxy resin.

    This high-tech polishing compound will cut faster and take the surface of your cured epoxy resin from a 1200 grit paper finish to a high level of gloss either by hand or using a power polisher.

  • Peel Ply Fabric

    7.8522.75 (ex vat)

    A light weight fabric that is laid over the wetted out reinforcement on the first coat. After the epoxy cures it is removed, the result is a slightly textured, amine blush free surface. Peel ply is also used when additional bonding and finished operations are required. Available in 1mt widths.

  • Sale!

    100mm x 15mm Laminating Roller

    7.86 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    Decanting Tap

    7.92 (ex vat)

    Plastic Tap used for decanting small quantities of Acetone or Polyester Resin from a 20lt or 25lt Plastic container.

    Add to basket
  • Sale!

    210gm Glass Cloth (twin weave)

    7.969.91 (ex vat)

    For use in general sheathing work, more common with model makers. Twill weave has good drapability, it is also a very ‘soft’ cloth that will laminate into awkward shapes and tight corners.

    Please select quantity range from dropdown menu (i.e. 1-4 mt) and enter the specific quantity you wish to order in the box beside the ‘add to basket’ button.

  • Sale!

    Corner Roller

    8.50 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool. Single wheel ‘Radius’ roller, used for corners where you need to consolidate matting or other types of reinforcements.

    Add to basket
  • Sale!

    140mm x 21mm Laminating Roller

    8.72 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Plastic Acetone Tap

    8.90 (ex vat)

    Plastic Tap to fit 1″ threaded hole on 45 gal barrels of acetone

    Add to basket
  • Sale!

    6mm Chopped Strands

    8.9557.50 (ex vat)

    Supplied in 6mm lengths and used for reinforcing the Gelcoat in the mould / gap filling / polyester putty. Also used as a fillet “sprinkled” into sharp internal corners during laminating.

  • Sale! Polyester-Resin-5kg.png

    Polyester Resin (Lloyds Approved)

    8.95159.75 (ex vat)

    Norsodyne H 13212 TAE is a general purpose polyester resin that is suitable for a wide range of applications, including: Marine, Roofing, Auto Repairs, Pond & Wet-Room Tanking.

  • Sale!

    Goggle

    9.45 (ex vat)

    Extremely comfortable with its modular design. Combines with visor to offer full face protection.

    • Ball-pivot adjustment on elasticated strap
    • Overflow chute for liquids
    • Fits over prescription glasses
    • Foam seal option available
    • Vented/ Sealed options available
    • Compatible with half-mask respirator

    Approved to EN166/170/172 1 39
    Polycarbonate lenses meet B for impact and hold the T rating for temperature
    Acetate lens meets F for impact

    BLEPSI sealed option also meets 4 and 5.

    Read more
  • Sander Head

    9.85 (ex vat)

    Lightweight head for easy sanding of roof decks. It has a universal joint which can be used at any angle and comes with a cushion pad base. It also has wing nut to secure the clamps holding in the emery paper.

    Add to basket
  • Sale!

    Resin Barrier/ Release Tape

    12.3519.85 (ex vat)

    This special high quality tape is designed specifically for use as a barrier or release tape for industrial resins like epoxy. It is smooth, very strong, non-stretch and totally non-stick for epoxy resin making it incredibly useful for a wide range of epoxy resin applications.

  • Sale!

    Carborundum grit – Slip Resistant Grit

    12.50198.60 (ex vat)

    Carborundum grit is used to produce an extremely hardwearing slip resistant surface. It can come pre-mixed Slip Resistant Topcoat or sprinkled onto a final flocoat or resin surface while still wet (pre-mixed looks better). Especially useful on workboats where abrasion to the GRP laminate is caused by ropes and chains. Also on Roofs/ Balconies and steps where a degree of slip resistant is required. Supplied as Grade 24 (medium grade). Other grades (Fine 36 grade & Course 12 grade) are available on request.

  • Sale!

    Clear Polyester Gelcoat

    12.50174.96 (ex vat)

    High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours.                                              Please NoteCatalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.

  • Sale!

    White Virgin Aluminium Oxide – Slip Resistant Grit

    12.50198.60 (ex vat)

    White Aluminium Oxide

    White aluminum oxide is used as a durable and efficient non-skid media. The white color minimizes the ‘darkening’ or ‘dilution’ of colored coatings. The angular shape of aluminum oxide makes it an ideal grit for use in a variety of non-skid applications including concrete floors, stairs and boat decks. The inert nature of aluminum oxide allows it to be used with a variety of coating materials. The hardness of the grit particle creates a durable, long-lasting surface that requires minimal maintenance.

    The grit is used to produce an extremely hardwearing slip resistant surface. It can come pre-mixed or sprinkled onto a final flocoat or resin surface while still wet (pre-mixed looks better). Especially useful on workboats where abrasion to the GRP laminate is caused by ropes and chains. Also on Balconies and steps where a degree of slip resistant is required. Supplied as Grade 24 (medium grade).

  • Sale!

    Pump Dispenser

    12.60 (ex vat)

    This Maxi Pump Dispenser is used for measuring accurately a 30ml /1 fl.oz. dose of liquid per pump.

    The 38mm screw head is suitable for 5 litre plastic containers. Lock-down pump head provides leak-proof shipment of product with pump in-situ.
    It is made from Polypropylene with stainless steel spring/valve.
    Please note: The 5lt plastic container (shown) is sold separately.

    Read more
  • Sale!

    225mm x 21mm Laminating Roller

    12.72 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Nitrile Gloves (XL) Box of 100

    12.95 (ex vat)

    Box of 100 lightly powdered X large nitrile gloves. These are tough, sensitive, non-sterile gloves with many uses. Ambidextrous with beaded cuff. Size: XL

    Read more
  • Sale!

    Hand Cleaner

    12.9555.00 (ex vat)

    Kleen-All Paste is a pleasant and easy to use general purpose hand cleanser that has become established as the market leader in products designed for the safe and effective removal of the most stubborn contaminates.

    Designed for use by Industry Professionals such as: – Paint Sprayer Engineers, Print Workers Mechanics, Fibreglass users, where it is difficult to clean dirty hands without resorting to the use of harsh solvents which defat the skin and can cause irritations, skin cracks and dermatitis.

    Kleen-All is a blend of powerful but gentle surfactants together with DBE (dibasic ester) and non abrasive polygrains for rapid cleaning action.

    Feature & Benefits;

    • Removes ALL PAINTS including 2 pack type
    • Removes RESINS, PIGMENT and ADHESIVES
    • Removes INKS, GREASE and GRIME.
    • No need to use harmful solvents.
    • Citrus fragrance.
    • Leaves hands clean and refreshed.
    • Economic in use.
  • Sale!

    Catalyst Dispensers

    12.9515.96 (ex vat)

    These Liquid Dispensing bottles are moulded from a durable, high grade flexible polypropylene which allows for single handed operation and are calibrated to an accuracy of 0.5ml. They will safely dispense catalyst into the engraved output chamber. 15ml bottle dispenses 1 – 15ml and holds 500ml. 80ml bottle dispenses 10-80ml and holds 1000ml. Note: 1ml = 1cc = 1mg. Please view our Catalyst mixing charts and our section on Health & Safety.

  • Extension Pole

    12.95 (ex vat)

    Metal extension pole supplied complete with screw on adaptor to allow easy use with tapered handle if preferred. Length 825mm. Extends to 1390mm.

    Add to basket
  • gloveman-natural-latex-gloves-xl-100-pack

    Latex Gloves (XL) Box of 100

    12.95 (ex vat)
    Add to basket
  • Sale!

    White PVC Apron

    12.96 (ex vat)

    Suitable against chemical & Fluid splash

    • Provides good abrasion resistance
    • Offers some chemical resistance
    • Flexible, light and tough
    • One size fits all
    • Sold and packaged individually
    Add to basket
  • Mixing Pumps

    13.7521.50 (ex vat)

    Each pump body of the pair is identical and will fit either container of the SP 1kg / 3kg /11.8 /23.6kg SP106, SP320 and SP115. However, each pump of the pair is fitted with an extension tube of correct length to reach exactly to the bottom of one container, so that there is a ‘resin pump’ and a ‘hardener pump’.

  • Sale!

    Clear Polyester Topcoat

    13.86189.62 (ex vat)

    Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. – Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale!

    F300 Flat Flashing

    14.72189.86 (ex vat)

    The ‘F’ trim range consists of flat flashing with three different widths. These trims are supplied as 20 metre rolls, and are mainly used where a pitched roof meets a flat roof. It should be nailed onto the roof deck and bent up the pitched roof slope being placed under the existing roof felt and tiles. If only fixed at the base in this manner, the trims will also act as an expansion trim.

    The F trims can also be used around vertical details. Any nails and joints should be taped and resin covered, the remainder of the trim can simply be top-coated during that stage of installation.

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please note the F300 is sold by (metre x unit price)

    All 20 metre rolls:

    • F300 – 300mm x 20m roll (standard and in stock)
    • F600 – 600mm x 20m roll
    • F900 – 900mm x 20m roll
  • Sale!

    Precision Mini Scale

    14.86 (ex vat)

    Precision Mini Scale

    Mini digital scale with extra accuracy down to 0.1g specially for weighing smaller quantities of resins, hardeners and pigments where extra accuracy is needed.

    Perfect for jewellery makers, model-makers and in fact anyone generally working with smaller quantities of resins and pigments!

  • Sale!

    White Polyester Gelcoat

    14.87183.45 (ex vat)

    High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please NoteCatalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.

  • Sale!

    White Polyester Topcoat

    14.95196.80 (ex vat)

    Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale!

    White Disposable Suit XL

    14.95 (ex vat)

    Disposable Boiler Suit to protect that has been designed to allow breathability whilst offering protection against splash and hazardous dusts.

    Hooded coverall.
    • Robust, yet lightweight.
    • 3 piece hood.
    • Elasticated face, wrist and ankles.
    • Excellent barrier to fine particles and fibres.
    • Ultra-low linting.
    • Stitched external seams.
    • Suitable for pharmaceutical, chemical processing, oil and gas industry, maintenance spray painting and many other applications.

    • Conforms to: CAT III, TYPE 5B, 6B. EN 1073-2, EN 1149-5, EN14126

    Add to basket
  • Sale! 6 Neon Pigments

    Neon Tinting Pigments for GlassCast Epoxy Resin

    15.88 (ex vat)

    Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.

    Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.

    The pigments can only be sold in a pack of 6 Neon colours;

    Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange

    Read more
  • C1, C2, C3 & C4 Corner Trims

    15.9518.92 (ex vat)

    Corner trims should be fixed to the deck with nails, and joined to the edge trims using Fix ALL adhesive. Any joints and nail heads should be taped over, resin applied and consolidated before laying the main laminate. Corner trims may need to be trimmed to size if using the shorter height profile edge trims – they are designed to fit all depths, so will need to be cut back to match the exact trims you are using.

    • C1 Universal External Corner Trim – Forms a left or right hand corner. Use with A and B range trims. (Standard and in stock)
    • C2 Fillet to Corner Trim – Use where a flat roof meets an abutting wall. Use with A, B and D260 trims.
    • C3 External or Internal Fillet Corner trims – Used as a preformed external or internal corner. Avoids mitring in situ. Use with a D260.
    • C4 Universal Internal Corner Trim – Forms a left or right hand corner. Use with A and B range trims.

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

  • Sale!

    C5 & C6 Clousure Trims

    15.95 (ex vat)

    Fitted by using Fix ALL adhesive to bond/ seal the closure to the end of the rolled trim (overlap by 50mm), and by nailing the trim to the roofing deck. Tape and resin cover as per the corner trims.

    • C5 Roof Ridge Closure – Preformed closure for application to the end of a roof ridge section. Use with E280 (Standard and in stock)
    • C6 Rolled Rib Closure – Preformed closure for application to the end of ER40/30 details

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

  • Sale! sp-colloidal-silica

    Polyester + Epoxy Filler – Colloidal Silica 250gm

    16.50 (ex vat)
    Add to basket
  • Sale!

    10kg Digital Scale

    17.82 (ex vat)

    These high capacity, high accuracy electronic digital scales are perfect for measuring GlassCast Resin and Hardener to the correct mix ratio.

  • Sale!

    Fibreglass Safety Kit – Standard

    18.78 (ex vat)

    This Kit contains a selection of high quality vital body protection which should be used when working and handling with Liquid Chemicals and Sanding Fibreglass materials. Please note: The products shown are for general Fibreglass use i.e. Glassfibre Repair/ Roofing Contractor etc. More specialised areas such as Moulding workshops, Spraying etc. may require different needs. For further Safety Information please view our Health & Safety section on our web-site.

    Contents: Tyvek® Protech Suit – 1 Full body protection, elasticated face, wrist & ankles, Category III Type 5B,6B/ 2 pair Chemical Resistant Disposable Gloves Cat 111 EN 374/ I Wrap around Spectacles EN166-F1- for Sanding/ 1 Disposable fold flat Mask, FFP3, dust & fume EN149:2009/ 3 pair Disposable Shoe Covers – elasticated ankles/ 2 pair Disposable Sleeve Covers – elasticated wrist & elbow, protects cloths/ 2 pair Ear Plugs – 3M™ Classic, 36db, all day comfort/ Name Tag – Identification & Ownership Fob, mixed colours/ Re-sealable bags – storage for safety Glasses & Mask/ 2.5lt White Container + Lid – for safe overall up-keep of the above items/ Full contents description + Health & Safety Information.

    Read more
  • Sale!

    Easy Composites EL2 Epoxy Resin (Laminating Resin)

    18.85129.65 (ex vat)

    EL2 is a high performance epoxy laminating resin suitable for hand-layup of reinforcements such as carbon fibre, aramid and glass fibre. Its combination of mechanical performance, fast wet-out, easy handling and great value make EL2 a hugely popular choice in motorsport, boat-building, model-making and general composites.

    Sold as a kit (kit weight = combined weight of resin and hardener). Available to buy online in 500g, 1kg & 5kg kits.

  • Sale!

    A200 Facia Trim (95 x 90mm)

    18.9220.68 (ex vat)

    Drip trims are fitted to the lowest edge of the roof where water will flow into the gutter. Two support battens should be fitted to the fascia to sit under the trim to allow a space for the gutter to fit behind the trim. Fix ALL adhesive should be used to bond the trim to the batten on the vertical face, and nails used to fix the horizontal face onto the roof decking.

    Don’t nail through the face of the trim – this will show through the final topcoat finish on the front face. To join two lengths together simply overlap (by 50mm) and slot two pieces together using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape.

    Fitted to the roof edges to allow drainage into the gutter.

    • A170 (75 x 84mm)
    • A200 (95 x 90mm) – (Standard and in stock – this is what we will ship)
    • A250 (95 x 140mm) – (In stock – please phone 01 466 3786 to purchase)
    • A200 (90 x 90mm) – (same A200, but with drip return)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    B260 Raised Edge Trim

    18.9220.68 (ex vat)

    Raised edge trims do not allow the water over the edge into gutters. They should be fitted on top of single battens that have been fixed to the fascia, as there doesn’t need to be a gap for a gutter to sit in. Fix ALL adhesive should be used to bond the trim to the batten on the vertical face, and nails used to fix the horizontal face onto the roof decking.

    Don’t nail through the face of the trim – this will show through the final topcoat finish on the front face. To join two lengths together simply overlap (by 50mm) and slot two pieces together using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape.

    All 3 metre lengths:

    • B240 (100 x 105mm)
    • B260 (130 x 125mm) (Standard and in stock – this is what we will ship)
    • B300 (110 x 175mm) (In stock – please ph: 01 466 3786 to purchase)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    C100 Simulated Lead Flashing

    18.9220.68 (ex vat)

    C trims are lengths of simulated lead flashing with different depths of face. These trims should not be covered with topcoat, as they have a finished face already to simulated lead. The C trims should be slotted into a pre-chased mortar joint in the brickwork (approx 35-45mm deep), and sealed in with clear silicone. Fix ALL adhesive should also be used on the back of the C trims to bond to the D trim that they sit on top of.

    All 3 metre lengths:

    • C100 – 35 x 100mm (Standard and in stock)
    • C150 – 35 x 150mm

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    D260 Wall Fillet Trim

    18.9220.68 (ex vat)

    D260 is a fillet trim used to butt up against walls. It also provides an expansion gap around the edge of the roof. Sit the trim with the vertical against the wall, and the horizontal face on the deck. To join two lengths together simply overlap (by 50mm) using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape. Nail the D trim to the horizontal deck.

    All 3 metre lengths:

    • D260 – 120 x 60 x 80mm (in stock)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    ER40-30 Simulated Lead Rolled Joint

    18.9220.68 (ex vat)

    ER40/30 is used to simulate the appearance of raised rolled lead joints. The trims should be nailed to the roof deck, any nail heads or joints bandaged and the whole trim laminated over.

    Use the C6 closures to cap the ends – nail to the deck and use Fix ALL adhesive to secure to the ER40/30 trim.

    In 3 metre lengths:

    • ER40/30 – 50 x 40mm

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    G150 External 90deg Angle Trim (75mm x 75mm)

    18.9220.68 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    The G range of external trims have the finished face on the outer face. The trims should be nailed, any joints/nail heads taped and resin covered as per usual.

    • G150 – 75mm x 75mm (Standard, and in stock – this is what we will ship)
    • G275 – 200mm x 75mm (in stock)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    G180 Gully trim – Expansion joint (15 x 140mm)

    18.9220.68 (ex vat)

    Use the G180 to allow for expansion on large roofs over 50m2. It will also act as an integral gutter to aid drainage. The roof deck will need to be cut to allow the trim to sit in the gap with the flanges of the trim sitting flush to the deck. Nail the trim down, then tape and laminate the trim following the usual process.

    G180 – 15 x 140mm

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

  • Sale!

    H150 Internal Angle Trim (75mm x 75mm)

    18.9220.68 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    The H range of internal trims have the finished face on the inner face. The trims should be nailed, any joints/nail heads taped and resin covered as per usual.

    • H150 – 75mm x 75mm (Standard and in stock – this is what will be delivered)
    • H275 – 200mm x 75mm (in stock)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs) or you could organise collection yourself.

  • Sale!

    G275 External 90 degree Angle Trim (200mm x 75mm)

    18.9220.68 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    The G range of external trims have the finished face on the outer face. The trims should be nailed, any joints/nail heads taped and resin covered as per usual.

    • G150 – 75mm x 75mm (Standard and in stock)
    • G275 – 200mm x 75mm (in stock – this is what we will ship)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    H275 Internal Angle Trim (200mm x 75mm)

    18.9220.68 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    The H range of internal trims have the finished face on the inner face. The trims should be nailed, any joints/nail heads taped and resin covered as per usual.

    • H150 – 75mm x 75mm (Standard and in stock)
    • H275 – 200mm x 75mm (in stock – this is what will be delivered)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs) or you could organise collection yourself.

  • Sale!

    H150SR Zinc effect – Preformed Rib Detail (25mm x 10mm)

    18.9220.68 (ex vat)

    GRP Zinc Effect Flat and Pitch Roofing trim.

    H150SR simulated Zinc effect GRP Trim is a perfect low cost product for your architectural roof. It also looks great and gets the water off the roof quickly.

    To join two lengths together simply overlap (by 50mm) using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape. Nail the D trim to the horizontal deck.

    All 3 metre lengths:

    • H150SR Zinc Effect rib detail 25mm x 10mm (in stock)

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Sale!

    Fibreglass Extension Pole

    19.85 (ex vat)

    Heavy duty Fibreglass and aluminium construction.

    • 1200 x 2400mm (4-8′) length
    • Quick release “Double Click” locking mechanism.
    • Screw fit end with push-fit adapter.
    • Professional fibreglass telescopic extension pole
    • Compatible with screw thread or push in rollers and accessories
    Add to basket
  • Sale! sp-microfibres

    Epoxy Filler – SP Microfibers 500gm

    19.86 (ex vat)
    Add to basket
  • Sale! Gelcoat Filler

    Gelcoat Filler (Teroson UP 620)

    19.86 (ex vat)
    Add to basket
  • Sale!

    GlassCast 10 Clear Casting Resin – Jewellery/ 3D Art/ Pen Blanks/ Clear Casting into Moulds

    19.87567.36 (ex vat)

    GlassCast® 10 is a water-clear, UV resistant epoxy casting resin suitable for castings and deep coatings up to 10mm in thickness. It is recommended for clear jewellery resin casting, 3D resin art, encapsulation and filling holes and gaps in wood (up to 10mm) and can be cast in multiple layers to an unlimited depth*. Open surface will require polishing. You could also add some Colour Pigments  (TranslucentSolid, Metallic, Silicone, Pinata, or Neon) to enhance your project.

    Suggested uses;

    • Clear or tinted resin jewellery / paperweights.
    • Resin & wood jewellery / walking stick handles and furniture pieces.
    • 3D resin art / Pen Blanks
    • Thick counter-tops (with embedded objects)
    • Water effects for models / scenarios

    How much resin will I need?

    Check out our GlassCast 10 Calculator to work out how much materials you will need for your project.

    See full details, including some Video’s below;

    Limited stock available. Please call us on 01 466 3786 to enquire.

  • Sale!

    GlassCast 50 Clear Casting Resin – River Tables/ Wood Turning-Bowls/ Large Jewellery

    19.87567.36 (ex vat)

    GlassCast® 50 is the remarkable new water-clear epoxy casting resin from the makers of the famous GlassCast product. GlassCast 50 is perfect for creating thick, water-clear, bubble-free castings up to 25mm deep. It is especially recommended for river tables, knot filling and other furniture projects where you will be casting a very thick layer of resin (up to 25mm per pour) and require the best clarity. It can be layered to create deep castings of unlimited depth. You could also add some Colour Pigments  (Translucent, Solid, Metallic, Silicone Oil, Pinata, or Neon) to enhance your project.

    Suggested uses:

    • River tables / knot holes
    • Wood and resin combination furniture (lamps, sculptures)
    • Clear castings / sculptures / Encapsulations / Paperweights

    How much resin will I need?

    Check out our GlassCast 50 Calculator to work out how much materials you will need for your project.

    See full details, including some excellent Video’s from our supplier and John Mc Grath below;

     

    Limited stock available. Please call us on 01 466 3786 to enquire.

  • Sale!

    Dispenser – 50ml Twin Tube Cartridge Gun

    19.88 (ex vat)

    50ml twin cartridge dispenser gun suitable for all our 50ml Permabond (ET500 Epoxy adhesive, as well as most other 50ml 1:1 twin-tube adhesive cartridges. Normally used together with disposable static mixer nozzles, sold separately.

    Read more
  • AT300 90 degree Angle Trim (3000mm x 240mm x 90mm)

    21.7523.50 (ex vat)

    These angled trims are used to cover any features that sit perpendicular to the main roof or any other laminated surface.

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • E280 Expansion Joint (65 x 200mm)

    25.2227.57 (ex vat)

    E280 can be used for creating rolls on any ridge details, expansion joints on large roofs (50m2 or over) or to bridge GRP to felt roofs. Where necessary a sufficient gap in the deck should be cut and the trim then needs to be fixed to each end of the decking at 300mm centres. Ensure the join and fixing points are reinforced with Scott Bader’s woven glass tape (which is significantly stronger than chopped strand mat). The laminate can then be applied in the normal manner.

    C5 caps can be fixed by applying a 6-8mm bead of Fix ALL adhesive to the inside edge of the overlapping trim and bedded in. The trims can also be bonded together for longer lengths.

    The E280 trim is very useful when needing to bridge the GRP to a neighbouring felt roof. Where possible the adjoining felt should be lifted to slide the E280 underneath. Apply two 6-8mm beads of Fix-All adhesive on the base of the trim edge and on the top where the felt will sit. Use clout or ring nails to hold in place, while adhesive cures, any exposed edges should have a further bead applied to avoid water/ moisture ingress. The other side of the trim can be fixed and laminated in the normal manner.

    Please note that E280 is also referred to as expansion joint and ridge roll for pitched roofs.

    CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.

    Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).

  • Kevlar

    27.5036.50 (ex vat)

    Kevlar is high in tensile strength and low in weight / High toughness / Flame & chemical resistance. Used specifically with Epoxy Resin. Uses – Motor parts / Kayaks / Body armour due to its high strength / weight ratio. 175gm Plain Weave

  • Sale!

    ET500 Structural Epoxy Adhesive

    28.76 (ex vat)

    ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive. ET500 has very good bond strength to a wide variety of substrates including metals, composites, wood, ceramics and some plastics.

    5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener).

  • Sale!

    Carbon/ Kevlar

    29.75 (ex vat)

    The carbon will provide the stiffness required whilst the Kevlar will provide the impact and abrasion resistance. 210gm Fabric. Uses – Motor sport / Marine applications. This cloth has good drape-ability and is easy to handle.

    Sold per square meter.

    Read more
  • Sale! sp-glass-bubbles

    Epoxy Filler – Glass Bubbles 300gm

    29.86 (ex vat)
    Add to basket
  • Sale!

    Polypropylene Sheet – 100 x 100cm

    29.89 (ex vat)

    Polypropylene plastic sheet is ideal for use as a non-stick baseboard or barriers for your GlassCast epoxy resin projects. It has a smooth finish and is easy to cut and bond. Use it to create a base or sides for a river table or custom shaped containers for jewellery or wood turning projects.

  • Sale! GRP Repair Kit (Small)

    GRP Repair Kit (Small)

    32.76 (ex vat)
    Add to basket
  • Sale!

    G4 Pond Sealer (Clear)

    34.5092.75 (ex vat)

    Deep bonding plastic coating for concrete, quick and simple.

    No Primer needed, can be used at low temperatures.  Seal out lime.

    G4 Pond Seal is a one component polyurethane which forms a non-porous, tough, durable but flexible seal.  It is browny translucent in  colour. Seals porous substrates such as concrete and brick. G4 will not seal concrete or lightweight blocks, these need to be rendered before application. When used for sealing ponds, any substrate below the water line must be cement rendered. G4 can be used at low temperatures, down to 0°c and in areas of relative high humidity. G4 cannot be used on bitumen of pond liners.

  • Sale!

    Lazer Thermometer

    38.95 (ex vat)

    Mini RayTemp infrared thermometer for routine day-to-day temperature checking.

    Ideal for measuring the temperature of the OSB board prior to applying the Resin & Chopped mat.

    No guessing on the amount of Hardener required for the resin & topcoat. See Catalyst Mixing Chart

    • Compact, lightweight & easy to use
    • Temperature range -50 to 330°C
    • Laser dot alignment
    • Target ratio 12:1

    Please note this should not be used for medical purposes

    Add to basket
  • Carbon Fibre

    39.50162.50 (ex vat)

    Carbon Fibre is used in composites with lightweight matrix. It is ideally suited to applications where strength / stiffness and low weight ratio are required. Uses – Aerospace / Motor industry / Military / Structural. 200gm 2 x 2 Twill – 1mt wide

  • Sale! sp-microballoons

    Epoxy Filler – Microballoons 300gm

    39.85 (ex vat)
    Read more
  • TriCast 10 Epoxy Resin Bundle (Edited)

    TriCast 10 Crystal Clear Epoxy Casting Resin

    39.86528.76 (ex vat)

    TriCast 10 – Fully transparent epoxy resin coating for Bar Tops, Countertops, Table Tops, Fine Art Paintings, Collages, Canvas, Furniture, Jewellery, Photos, Arts & Crafts. 

    100% Crystal Clear Castings up to 10mm in depth. BPA (Bisphenol A) free.

    Suitable for applications in art and decoration to make transparent objects from 1 mm up to 10 mm such as thin inclusions, embeddings, wood surface sealing and coatings.

    Resin Properties

    • High transparency
    • Fast Cure
    • Low viscosity
    • Self-degassing behaviour
    • Single pour casting up to 10 mm
    • Strong UV resistance

  • TriCast 50 Epoxy Resin Bundle (Edited)

    TriCast 50 Crystal Clear Epoxy Casting Resin

    39.86528.76 (ex vat)

    TriCast 50 – Epoxy Resin for Deep Pours in applications such as River Resin Tables

    100% Crystal Clear Casting Resin

    TriCast 50 is suitable for single, deep pours up to 50mm and is suitable for a variety of applications including furniture-making e.g. River Resin Tables

    Resin Properties

    • High transparency
    • Low viscosity
    • Self-degassing behaviour
    • Single pour casting up to 50 mm
    • Good UV resistance

  • Sale! GRP Repair Kit (Medium)

    GRP Repair Kit (Medium)

    43.87 (ex vat)
    Add to basket
  • Sale! 1sq-mt-Roofing-Repair-Kit (v2)

    1sq meter – Roofing Repair Kit

    44.37 (ex vat)
    Add to basket
  • Sale!

    3M 4251 Respirator

    46.75 (ex vat)

    Maintenance free design for maximum safety and simplicity. Low resistance parabolic valve to reduce heat build-up. Soft/Non-allergenic face piece material. Supplied in a hermetically sealed foilbag to extend shelf life and prevent contamination. Meets european standard EN405:2002 for valved filtering half mask respirators for gases or gas and particulate combinations.

    • Organic vapour and particulate respirator
    • Unique design with integral filters
    • Exempt from the maintenance requirements of coshh regulations if disposed of within the month
    • Flexible, soft, non-allergenic face piece
    • Exhalation valve for effective removal of heat and moisture build up
    • Resealable bag provides clean and convenient storage between uses
    Add to basket
  • Sale!

    Petri Dish Art Starter Kit

    49.60 (ex vat)

    Create your own stunning petrified rainbows with the Petri Dish Art Starter Kit in the form of coasters or mini pieces of art! This kit includes everything you need for this project – epoxy resin, alcohol inks, mould and accessories.

    Read more
  • Sale!

    Metal Drum Tap

    49.75 (ex vat)

    Robust cast iron plug-less tap has a 2inch bsp thread suitable for dispensing viscous liquids (including Resins) from 240litre (225kg) drums.

    Add to basket
  • Sale!

    Fibreglass Safety Kit – Premier

    49.85 (ex vat)

    This Kit contains a selection of high quality vital body protection which should be used when working and handling with Liquid Chemicals and Sanding Fibreglass materials. Please note: The products shown are for general Fibreglass use i.e. Glassfibre Repair/ Roofing Contractor etc. More specialised areas such as Moulding workshops, Spraying etc. may require different needs. For further Safety Information please view our Health & Safety section on our web-site.

    Contents: Tyvek® Protech Suit – 1 Full body protection, elasticated face, wrist & ankles, Category III Type 5B,6B/ 2 pair Chemical Resistant Disposable Gloves Cat 111 EN 374/ 1 pair Gloves – Chemical & Mechanical type, Slip Resistant on palm, EN 374-1-2-3 AKL/ I Wrap around Spectacles EN166-F1- for Sanding/ 1 Goggle – Sealed, Chemical protection, Acetate Lens 2-1,2,1 BT 9 CE/ 1 Disposable fold flat Mask, FFP3, dust & fume EN149:2009/ 1 Respirator – 3M 4251 Twin Inhalation valves, FFA1P2, EN 405: 2001+A1, organic vapours/ 2 Disinfectant Wipes for 3M™ 4251 Respirator/ 3 pair Disposable Shoe Covers – elasticated ankles/ 2 pair Disposable Sleeve Covers – elasticated wrist & elbow, protects cloths/ 3 pair Ear Plugs – 3M Classic, 36db, all day comfort/ Name Tag – Identification & Ownership Fob, mixed colours/ Re-sealable bags – storage for safety Glasses & Mask/ 5lt White Container + Lid – for safe overall up-keep of the above items/ Full contents description + Health & Safety Information.

    Read more
  • Sale!

    Tool Kit 1

    53.85 (ex vat)
    Add to basket
  • Sale!

    G4 Dampseal

    59.75 (ex vat)

    A moisture curing single part polyurethane varnish ideal for sealing damp porous surfaces prior to using release agent. Used as damp proof floor sealing, pond sealing, sealing concrete prior to GRP sheathing where alkali in concrete can react with resins. Also used to improve the bond of GRP to metal.

  • Sale! GRP Repair Kit (Large)

    GRP Repair Kit (Large)

    59.86 (ex vat)
    Add to basket
  • Sale! 2sq-mt-Roofing-Repair-Kit (v2)

    2sq meter – Roofing Repair Kit

    65.86 (ex vat)
    Add to basket
  • Sale! Toolkit-2

    Tool Kit 2

    69.87 (ex vat)
    Add to basket
  • Sale! Toolkit-3

    Tool Kit 3

    79.54 (ex vat)
    Add to basket
  • Sale!

    5sq meter Fibreglass Roofing Kit (medium duty)

    145.53 (ex vat)

    Kit Contents:

    • 6kgs Polyester Resin (Lloyd’s Approved)
    • 5 meters 450gm/m2 Chopped Mat (medium duty)
    • 2.5kgs Polyester (dark grey) Roofing Topcoat
    • 400gm Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    5sq meter Fibreglass Roofing Kit (heavy duty)

    155.66 (ex vat)

    Kit Contents:+

    • 7.5kgs Polyester Resin (Lloyd’s) Approved
    • 5 meters 600gm/m2 Chopped Mat (heavy duty)
    • 2.5kgs Polyester (dark grey) Roofing Topcoat
    • 500gm Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    10sq meter Fibreglass Roofing Kit (medium duty)

    272.72 (ex vat)

     

    Kit Contents:

    • 12kgs Polyester Resin (Lloyd’s approved)
    • 10 meters 450gm/m2 Chopped Mat
    • 5kgs Polyester (dark grey) Roofing Topcoat
    • 800gm Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    10sq meter Fibreglass Roofing Kit (heavy duty)

    295.89 (ex vat)

    Kit Contents:

    • 15kgs Polyester Resin (Lloyd’s) Approved
    • 10 meters 600gm/m2 Chopped Mat
    • 5kgs Polyester (dark grey) Roofing Topcoat
    • 1lt Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    15sq meter Fibreglass Roofing Kit (medium duty)

    376.63 (ex vat)

     

    Kit Contents:

    • 18kgs Polyester Resin (Lloyds Approved)
    • 15 meters 450gm/m2 Chopped Mat
    • 7.5kgs Polyester (dark grey) Roofing Topcoat
    • 1.2lt Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    15sq meter Fibreglass Roofing Kit (heavy duty)

    418.35 (ex vat)

    Kit Contents:

    • 22.5kgs Polyester Resin (Lloyd’s Approved)
    • 15 meters 600gm/m2 Chopped Mat
    • 7.5kgs Polyester (dark grey) Roofing Topcoat
    • 1.25lt Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    20sq meter Fibreglass Roofing Kit (medium duty)

    453.38 (ex vat)

     

    Kit Contents:

    • 24kgs Polyester Resin (Lloyds Approved)
    • 20 meters 450gm/m2 Chopped Mat
    • 10kgs Polyester (dark grey) Roofing Topcoat
    • 1.5lt Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    20sq meter Fibreglass Roofing Kit (heavy duty)

    523.95 (ex vat)

    Kit Contents:

    • 30kgs Polyester Resin (Lloyd’s Approved.
    • 20 meters 600gm/m2 Chopped Mat
    •  10kgs Polyester (dark grey) Roofing Topcoat
    • 1.5lt Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    25sq meter Fibreglass Roofing Kit (medium duty)

    531.23 (ex vat)

     

    Kit Contents:

    • 30kgs Polyester Resin (Lloyds Approved)
    • 25 meters 450gm/m2 Chopped Mat
    • 12.5kgs Polyester (dark grey) Roofing Topcoat
    • 1.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    25sq meter Fibreglass Roofing Kit (heavy duty)

    599.95 (ex vat)

    Kit Contents:

    • 37.5kgs Polyester Resin (Lloyd’s Approved)
    • 25 meters 600gm/m2 Chopped Mat
    • 12.5kgs Polyester (dark grey) Roofing Topcoat
    • 2kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    30sq meter Fibreglass Roofing Kit (medium duty)

    615.86 (ex vat)

     

    Kit Contents:

    • 36kgs Polyester Resin (Lloyd’s Approved)
    • 30 meters 450gm/m2 Chopped Mat
    • 15kgs Polyester (dark grey) Roofing Topcoat
    • 2.25kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof willprovide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    30sq meter Fibreglass Roofing Kit (heavy duty)

    675.12 (ex vat)

    Kit Contents:

    • 45kgs Polyester Resin (Lloyd’s Approved).
    • 30meters 600gm/m2 Chopped Mat
    • 15kgs Polyester (dark grey) Roofing Topcoat
    • 2.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof willprovide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    35sq meter Fibreglass Roofing Kit (medium duty)

    731.28 (ex vat)

     

    Kit Contents:

    • 42kgs  Polyester Resin (Lloyd’S Approved)
    • 35 meters 450gm/m2 Chopped Mat
    • 17.5kgs Polyester (dark grey) Topcoat
    • 2.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    40sq meter Fibreglass Roofing Kit (medium duty)

    794.03 (ex vat)

     

    Kit Contents:

    • 48kgs Polyester Resin (Lloyd’s)
    • 40 meters 450gm/m2 Chopped Mat
    • 20kgs Polyester (dark grey) Topcoat
    • 2.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    35sq meter Fibreglass Roofing Kit (heavy duty)

    796.46 (ex vat)

    Kit Contents:

    • 50kgs Polyester Resin
    • 35 meters 600gm/m2 Chopped Mat
    • 17.5kgs Polyester (dark grey) Roofing Topcoat
    • 2.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    45sq meter Fibreglass Roofing kit (medium duty)

    872.31 (ex vat)

     

    Kit Contents:

    • 54kgs Polyester Resin (Lyods Approved)
    • 45 meters 450gm/m2 Chopped Mat
    • 22.5kgs Polyester (dark grey) Topcoat
    • 3kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    40sq meter Fibreglass Roofing Kit (heavy duty)

    877.87 (ex vat)

    Kit Contents:

    • 60kgs Polyester Resin (Lloyds Approved)
    • 40 meters 600gm/m2 Chopped Mat
    • 20kgs Polyester (dark grey) Roofing Topcoat
    • 3kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    45sq meter Fibreglass Roofing (heavy duty)

    952.13 (ex vat)

    Kit Contents:

    • 70kgs Polyester Resin (Lloyd’s Approved)
    • 45 meters 600gm/m2 Chopped Mat
    • 22.5kgs Polyester (dark grey) Roofing Topcoat
    • 3.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    50sq meter Fibreglass Roofing Kit (medium duty)

    963.97 (ex vat)

     

    Kit Contents:

    • 60kgs Polyester Resin (Lloyd’s)
    • 50 meters 450gm/m2 Chopped Mat
    • 25kgs Polyester (dark grey) Roofing Topcoat
    • 3.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (medium grade – 450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    50sq meter Fibreglass Roofing Kit (heavy duty)

    1,050.98 (ex vat)

    Kit Contents:

    • 80kgs Polyester Resin (Lloyd’s Approved).
    • 50 meters 600gm/m2 Chopped Mat
    • 25kgs Polyester (dark grey) Roofing Topcoat
    • 4kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    55sq meter Fibreglass Roofing Kit (medium duty)

    1,075.92 (ex vat)

    Kit Contents:

    • 66kgs Polyester Resin (Lloyd’s Approved)
    • 55 meters 450gm/m2 Chopped Mat
    • 27.5kgs Polyester (dark grey) Roofing Topcoat
    • 4kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    55sq meter Fibreglass Roofing Kit (heavy duty)

    1,143.03 (ex vat)

    Kit Contents:

    • 83kgs Polyester Resin (Lloyd’s Approved)
    • 55 meters 600gm/m2 Chopped Mat
    • 27.5kgs Polyester (dark grey) Roofing Topcoat
    • 4.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    60sq meter Fibreglass Roofing Kit (medium duty)

    1,158.29 (ex vat)

    Kit Contents:

    • 72kgs Polyester Resin (Lloyds Approved)
    • 60 meters 450gm/m2 Chopped Mat
    • 30kgs Polyester (dark grey) Roofing Topcoat
    • 4kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    65 sq meter Fibreglass Roofing Kit (medium duty)

    1,252.32 (ex vat)

    Kit Contents:

    • 78kgs Polyester Resin (Lloyd’s Approved)
    • 65 meters 450gm/m2 Chopped Mat
    • 47kgs Polyester (dark grey) Roofing Topcoat
    • 4.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.0

     

    Add to basket
  • Sale!

    60sq meter Fibreglass Roofing Kit (heavy duty)

    1,254.52 (ex vat)

    Kit Contents:

    • 90kgs Polyester Resin (Lloyd’s Approved).
    • 60 meters 600gm/m2 Chopped Mat
    • 30kgs Polyester (dark grey) Roofing Topcoat
    • 5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    65sq meter Fibreglass Roofing Kit (heavy duty)

    1,325.61 (ex vat)

    Kit Contents:

    • 98kgs Polyester Resin (Lloyd’s Approved)
    • 65meters 600gm/m2 Chopped Mat
    • 32.5kgs Polyester (dark grey) Roofing Topcoat
    • 5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    70 sq meter Fibreglass Roofing Kit (medium duty)

    1,329.74 (ex vat)

    Kit Contents:

    • 84kgs Polyester Resin (Lloyds Approved)
    • 70 meters 450gm/m2 Chopped Mat
    • 35kgs Polyester (dark grey) Roofing Topcoat
    • 5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    70sq meter Fibreglass Roofing Kit (heavy duty)

    1,384.17 (ex vat)

    Kit Contents:

    • 105kgs Polyester Resin (Lloyd’s Approved)
    • 70meters 600gm/m2 Chopped Mat
    • 35kgs Polyester (dark grey) Roofing Topcoat
    • 5.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    75 sq meter Fibreglass Roofing Kit (medium duty)

    1,436.60 (ex vat)

    Kit Contents:

    • 90kgs Polyester Resin (Lloyd’s Approved)
    • 75 meters 450gm/m2 Chopped Mat
    • 37.5kgs Polyester (dark grey) Roofing Topcoat
    • 5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    75sq meter Fibreglass Roofing Kit (heavy duty)

    1,476.61 (ex vat)

    Kit Contents:

    • 113kgs Polyester Resin (Lloyd’s Approved)
    • 75 meters 600gm/m2 Chopped Mat
    • 37.5kgs Polyester (dark grey) Roofing Topcoat
    • 6kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    80 sq meter Fibreglass Roofing Kit (medium duty)

    1,497.10 (ex vat)

    Kit Contents:

    • 96kgs Polyester Resin (Lloyd’s Approved)
    • 80 meters 450gm/m2 Chopped Mat
    • 40kgs Polyester (dark grey) Roofing Topcoat
    • 5.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    80sq meter Fibreglass Roofing Kit (heavy duty)

    1,563.32 (ex vat)

    Kit Contents:

    • 120kgs Polyester Resin (Lyod’s Approved
    • 80meters 600gm/m2 Chopped Mat
    • 40kgs Polyester (dark grey) Roofing Topcoat
    • 6.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    85 sq meter Fibreglass Roofing Kit (medium duty)

    1,598.54 (ex vat)

    Kit Contents:

    • 102kgs Polyester Resin Lloyd’s Approved)
    • 85 meters 450gm/m2 Chopped Mat
    • 42.5kgs Polyester (dark grey) Roofing Topcoat
    • 6kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    85sq meter Fibreglass Roofing Kit (heavy duty)

    1,646.10 (ex vat)

    Kit Contents:

    • 128kgs Polyester Resin (Lloyd’s Approved)
    • 85meters 600gm/m2 Chopped Mat
    • 42.5kgs Polyester (dark grey) Roofing Topcoat
    • 7kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    90 sq meter Fibreglass Roofing Kit (medium duty)

    1,667.39 (ex vat)

    Kit Contents:

    • 108kgs Polyester Resin (Lloyd’s Approved)
    • 90 meters 450gm/m2 Chopped Mat
    • 45kgs Polyester (dark grey) Roofing Topcoat
    • 6kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    90 sq meter Fibreglass Roofing Kit (heavy duty)

    1,730.41 (ex vat)

    Kit Contents:

    • 135kgs Polyester Resin (Lloyd’s Approved)
    • 90meters 600gm/m2 Chopped Mat
    • 45kgs Polyester (dark grey) Roofing Topcoat
    • 7.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    95sq meter Fibreglass Roofing Kit (medium duty)

    1,737.64 (ex vat)

    Kit Contents:

    • 114kgs Polyester Resin (Lloyd’s Approved)
    • 95 meters 450gm/m2 Chopped Mat
    • 47.5kgs Polyester (dark grey) Roofing Topcoat
    • 6.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket
  • Sale!

    95 sq meter Fibreglass Roofing Kit (heavy duty)

    1,791.17 (ex vat)

    Kit Contents:

    • 143kgs Polyester Resin (Lloyd’s Approved)
    • 95meters 600gm/m2 Chopped Mat
    • 47.5kgs Polyester (dark grey) Roofing Topcoat
    • 7.5kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    100sq meter Fibreglass Roofing Kit (medium duty)

    1,845.86 (ex vat)

    Fibreglass Roofing Kit Contents:

    • 120kgs Polyester Resin (Lloyd’s Approved)
    • 100 meters 450gm/m2 Chopped Mat
    • 50kgs Polyester (dark grey) Roofing Topcoat
    • 7kg Catalyst

    This Fibreglass kit provides sufficient resin/topcoat and catalyst for a single layer (450gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installing correctly, your roof will provide you with long-term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Toolkit pack.

    For General Health Information see section on hazards.

     

    Add to basket
  • Sale!

    100 sq meter Fibreglass Roofing Kit (heavy duty)

    1,868.10 (ex vat)

    Kit Contents:

    • 150kgs Polyester Resin (Lloyd’s Approved)
    • 100 meters 600gm/m2 Chopped Mat
    • 50kgs Polyester (dark grey) Roofing Topcoat
    • 8kg Catalyst

    This Fibreglass kit provide sufficient resin / topcoat and catalyst for a single layer (600gm/m2) of Chopped Strand Mat to cover the area required.

    The materials are specifically selected from our extensive range of products which gives you the assurance that when installed correctly, your roof will provide you with long term UV resistance and will remain watertight and maintenance free for many years.

    To order, just choose your roof size and use the links below to select your Trims/ Glassfibre Tape and Tool kit pack.

    For General Health Information see section on hazards.

    Add to basket