Shop
Showing 97–112 of 209 results
-
Extension Pole
€12.95 (ex vat)Metal extension pole supplied complete with screw on adaptor to allow easy use with tapered handle if preferred. Length 825mm. Extends to 1390mm.
-
Sale!
White PVC Apron
€12.96 (ex vat)Suitable against chemical & Fluid splash
- Provides good abrasion resistance
- Offers some chemical resistance
- Flexible, light and tough
- One size fits all
- Sold and packaged individually
-
Mixing Pumps
€13.75 – €21.50 (ex vat)Each pump body of the pair is identical and will fit either container of the SP 1kg / 3kg /11.8 /23.6kg SP106, SP320 and SP115. However, each pump of the pair is fitted with an extension tube of correct length to reach exactly to the bottom of one container, so that there is a resin pump’ and a hardener pump’.
-
Sale!
Clear Polyester Topcoat
€13.86 – €189.62 (ex vat)Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
F300 Flat Flashing
€14.72 – €189.86 (ex vat)The ‘F’ trim range consists of flat flashing with three different widths. These trims are supplied as 20 metre rolls, and are mainly used where a pitched roof meets a flat roof. It should be nailed onto the roof deck and bent up the pitched roof slope being placed under the existing roof felt and tiles. If only fixed at the base in this manner, the trims will also act as an expansion trim.
The F trims can also be used around vertical details. Any nails and joints should be taped and resin covered, the remainder of the trim can simply be top-coated during that stage of installation.
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
Please note the F300 is sold by (metre x unit price)
All 20 metre rolls:
- F300 – 300mm x 20m roll (standard and in stock)
- F600 – 600mm x 20m roll
- F900 – 900mm x 20m roll
-
Sale!
Precision Mini Scale
€14.86 (ex vat)Precision Mini Scale
Mini digital scale with extra accuracy down to 0.1g specially for weighing smaller quantities of resins, hardeners and pigments where extra accuracy is needed.
Perfect for jewellery makers, model-makers and in fact anyone generally working with smaller quantities of resins and pigments!
-
Sale!
White Polyester Gelcoat
€14.87 – €183.45 (ex vat)High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please Note: Catalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.
-
Sale!
White Polyester Topcoat
€14.95 – €196.80 (ex vat)Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
White Disposable Suit XL
€14.95 (ex vat)Disposable Boiler Suit to protect that has been designed to allow breathability whilst offering protection against splash and hazardous dusts.
Hooded coverall.
• Robust, yet lightweight.
• 3 piece hood.
• Elasticated face, wrist and ankles.
• Excellent barrier to fine particles and fibres.
• Ultra-low linting.
• Stitched external seams.
• Suitable for pharmaceutical, chemical processing, oil and gas industry, maintenance spray painting and many other applications.• Conforms to: CAT III, TYPE 5B, 6B. EN 1073-2, EN 1149-5, EN14126
-
Sale!
Neon Tinting Pigments for GlassCast Epoxy Resin
€15.88 (ex vat)Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.
Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.
The pigments can only be sold in a pack of 6 Neon colours;
Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange
-
C1, C2, C3 & C4 Corner Trims
€15.95 – €18.92 (ex vat)Corner trims should be fixed to the deck with nails, and joined to the edge trims using Fix ALL adhesive. Any joints and nail heads should be taped over, resin applied and consolidated before laying the main laminate. Corner trims may need to be trimmed to size if using the shorter height profile edge trims – they are designed to fit all depths, so will need to be cut back to match the exact trims you are using.
- C1 Universal External Corner Trim – Forms a left or right hand corner. Use with A and B range trims. (Standard and in stock)
- C2 Fillet to Corner Trim – Use where a flat roof meets an abutting wall. Use with A, B and D260 trims.
- C3 External or Internal Fillet Corner trims – Used as a preformed external or internal corner. Avoids mitring in situ. Use with a D260.
- C4 Universal Internal Corner Trim – Forms a left or right hand corner. Use with A and B range trims.
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
