2.5kg
Showing all 14 results
-
Sale!
Summer Catalyst
From €1.97 (ex vat)All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.
-
Sale!
Winter Catalyst
From €1.97 (ex vat)Winter Catalyst (HBO-50) has been specifically designed for addition to CrysticCOOL Cure Resin and topcoats to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. It can also be added to other polyester resins / Gelcoats and Topcoats – but it will be similar to the summer catalyst cure times. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.
-
Sale!
Polyester Resin (Lloyds Approved)
From €7.50 (ex vat)Norsodyne H 13212 TAE is a general purpose polyester resin that is suitable for a wide range of applications, including: Marine, Roofing, Auto Repairs, Pond & Wet-Room Tanking.
-
Sale!
Clear Polyester Gelcoat
From €10.89 (ex vat)High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.
-
Sale!
Clear Polyester Topcoat
From €12.96 (ex vat)Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
White Polyester Gelcoat
From €13.50 (ex vat)High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please Note: Catalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.
-
Sale!
White Polyester Topcoat
From €13.98 (ex vat)Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
