Epoxy Resins & Specialised Fabrics
Showing all 16 results
-
Sale!
Celz Silicone Oil 50ml for GlassCast Epoxy Resins
€4.12 (ex vat)High quality silicone cell dispersion media for use in epoxy resin art to create amazing cells and lacing effects
-
Sale!
Solid Colour Pigments – 20ml
€4.65 – €6.98 (ex vat)Super-concentrated, solid colour liquid pigments used to add strong, vibrant, opaque colour to resin for projects including resin flow art, countertops, decorative flooring, wood inlays, resin castings and more. Just a single drop can create a see-through colour tint, whilst adding more pigment will create a solid colour – see below for more details.
-
Sale!
PaiBoat Topfinish 2 Polish
€7.42 – €23.98 (ex vat)Advanced, fast cutting polishing compound developed specifically for tough plastics like cured epoxy resin.
This high-tech polishing compound will cut faster and take the surface of your cured epoxy resin from a 1200 grit paper finish to a high level of gloss either by hand or using a power polisher.
-
Peel Ply Fabric
€7.85 – €22.75 (ex vat)A light weight fabric that is laid over the wetted out reinforcement on the first coat. After the epoxy cures it is removed, the result is a slightly textured, amine blush free surface. Peel ply is also used when additional bonding and finished operations are required. Available in 1mt widths.
-
Mixing Pumps
€13.75 – €21.50 (ex vat)Each pump body of the pair is identical and will fit either container of the SP 1kg / 3kg /11.8 /23.6kg SP106, SP320 and SP115. However, each pump of the pair is fitted with an extension tube of correct length to reach exactly to the bottom of one container, so that there is a resin pump’ and a hardener pump’.
-
Sale!
Neon Tinting Pigments for GlassCast Epoxy Resin
€15.88 (ex vat)Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.
Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.
The pigments can only be sold in a pack of 6 Neon colours;
Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange
-
Sale!
GlassCast 10 Clear Casting Resin – Jewellery/ 3D Art/ Pen Blanks/ Clear Casting into Moulds
€19.87 – €567.36 (ex vat)GlassCast® 10 is a water-clear, UV resistant epoxy casting resin suitable for castings and deep coatings up to 10mm in thickness. It is recommended for clear jewellery resin casting, 3D resin art, encapsulation and filling holes and gaps in wood (up to 10mm) and can be cast in multiple layers to an unlimited depth*. Open surface will require polishing. You could also add some Colour Pigments (Translucent, Solid, Metallic, Silicone, Pinata, or Neon) to enhance your project.
Suggested uses;
- Clear or tinted resin jewellery / paperweights.
- Resin & wood jewellery / walking stick handles and furniture pieces.
- 3D resin art / Pen Blanks
- Thick counter-tops (with embedded objects)
- Water effects for models / scenarios
How much resin will I need?
Check out our GlassCast 10 Calculator to work out how much materials you will need for your project.
See full details, including some Video’s below;
Limited stock available. Please call us on 01 466 3786 to enquire.
-
Sale!
GlassCast 50 Clear Casting Resin – River Tables/ Wood Turning-Bowls/ Large Jewellery
€19.87 – €567.36 (ex vat)GlassCast® 50 is the remarkable new water-clear epoxy casting resin from the makers of the famous GlassCast product. GlassCast 50 is perfect for creating thick, water-clear, bubble-free castings up to 25mm deep. It is especially recommended for river tables, knot filling and other furniture projects where you will be casting a very thick layer of resin (up to 25mm per pour) and require the best clarity. It can be layered to create deep castings of unlimited depth. You could also add some Colour Pigments (Translucent, Solid, Metallic, Silicone Oil, Pinata, or Neon) to enhance your project.
Suggested uses:
- River tables / knot holes
- Wood and resin combination furniture (lamps, sculptures)
- Clear castings / sculptures / Encapsulations / Paperweights
How much resin will I need?
Check out our GlassCast 50 Calculator to work out how much materials you will need for your project.
See full details, including some excellent Video’s from our supplier and John Mc Grath
below;
Limited stock available. Please call us on 01 466 3786 to enquire.
-
Sale!
Dispenser – 50ml Twin Tube Cartridge Gun
€19.88 (ex vat)50ml twin cartridge dispenser gun suitable for all our 50ml Permabond (ET500 Epoxy adhesive, as well as most other 50ml 1:1 twin-tube adhesive cartridges. Normally used together with disposable static mixer nozzles, sold separately.
-
Kevlar
€27.50 – €36.50 (ex vat)Kevlar is high in tensile strength and low in weight / High toughness / Flame & chemical resistance. Used specifically with Epoxy Resin. Uses Motor parts / Kayaks / Body armour due to its high strength / weight ratio. 175gm Plain Weave
-
Sale!
Carbon/ Kevlar
€29.75 (ex vat)The carbon will provide the stiffness required whilst the Kevlar will provide the impact and abrasion resistance. 210gm Fabric. Uses Motor sport / Marine applications. This cloth has good drape-ability and is easy to handle.
Sold per square meter.
-
Carbon Fibre
€39.50 – €162.50 (ex vat)Carbon Fibre is used in composites with lightweight matrix. It is ideally suited to applications where strength / stiffness and low weight ratio are required. Uses Aerospace / Motor industry / Military / Structural. 200gm 2 x 2 Twill – 1mt wide