Gelcoat & Topcoat

Showing all 10 results

  • Premier CrysticROOF Topcoat

    The CrysticROOF Premier Topcoat meets BS476 Part 3 for all roof structures and shapes including: flat, valley and pitched roofs, walkways, roof-lights and balconies. When correctly applied, it provides long term UV resistance and weathering performance, remaining watertight and maintenance-free for many years.

    CrysticROOF ‘BBA Premier’ is only available from a fully trained accredited CrysticROOF installer and comes with a 25 year materials guarantee (to qualify to become an approved CrysticROOF Premier installer you must attend a one day Training Course).

    The CrysticROOF range of cold-applied GRP roofing products was developed specifically for new flat and pitched roof designs. It is a fully BBA approved flat roofing system, which now includes a fire resistant (FR) isophthalic topcoat as standard, helpings installers and contractors avoid the risk of not meeting fire safety legislation and building regulations. Available in Dark Grey (RAL 7015) as standard. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Read more
  • Coloured Gelcoat

    0.00 (ex vat)

    Coloured Gelcoat to RAL 840 Colours – Available in 0.5kg/ 1kg/ 2.5kg/ 5kgs/ 20kgs. Please phone 00353 1 466 3786 for availability and price. Please NoteCatalyst (hardener) must also be added to the Topcoat in order for it to cure.For General Health Information see section on hazards.

    Please contact the office on 01 466 3786 if you require coloured Gelcoat.

    Read more
  • Coloured Topcoat

    0.00 (ex vat)

    Coloured Gelcoat to RAL 840 Colours – Available in 0.5kg/ 1kg/ 2.5kg/ 5kgs/ 20kgs. Please phone 00353 1 4663786 for availability and price. Please Note: Catalyst  (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Please contact the office on 01 466 3786 if you require coloured Topcoat.

    Read more
  • Slip Resistant Topcoat

    0.00 (ex vat)

    Similar to Flocoat but with the addition of a slip resistant finish. The flocoat can be applied to an area where a degree of slip resistance is required i.e. Decks and walkways of Roofs/ Balconies/ Boats & Steps. Available in a variety of colours. Please phone 00353 1 4663786 for availability and price. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Add to basket
  • Sale!

    Clear Polyester Gelcoat

    12.50169.80 (ex vat)

    High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours.                                              Please NoteCatalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.

  • Sale!

    Clear Polyester Topcoat

    13.86187.15 (ex vat)

    Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. – Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale!

    White Polyester Gelcoat

    14.87179.86 (ex vat)

    High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please NoteCatalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.

  • Sale!

    White Polyester Topcoat

    14.95189.75 (ex vat)

    Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale! Gelcoat Filler

    Gelcoat Filler (Teroson UP 620)

    21.63 18.37 (ex vat)

    Gelcoat filler is a white, waterproof gelcoat filler for surface repairs. It is paintable, easy to mix, apply, shape and sand. Suited to marine paint, can be painted with any marine paint. Use with glass-fibre Mat for structural repairs to GRP and can be used on glass-fibre or gelcoat. It has a working time of 8 min and a curing time of 20 min. Can tolerate temperatures up to +160°C. Net weight 241gm.

    Add to basket
  • Sale!

    CrysticROOF Topcoat

    31.95158.89 (ex vat)

    CrysticRoof Topcoat is made from an Isophthalic base resin which means it gives superior performance in finish. It has been developed to ensure good intrinsic weathering properties with excellent UV and water resistance. Formulated to be easy to apply by both roller and brush and to provide a tack free finish when cured. The topcoats come pre-pigmented (standard Dark grey – RAL 7011 ) for your convenience. It is suitable for use in general flat roofing application. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.