Tools & Ancillaries

Showing 1–16 of 46 results

  • Crestabond M1-30 Bonding Agent

    Crestabond M1-30 Bonding Agent

    Crestabond® M1-30

    Crestabond M1-30 is a toughened, two component 10:1 MMA structural adhesive which is designed for bonding a wide range of substrates including metals, plastics and composite materials in industrial applications.

    This adhesive demonstrates excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive, requiring minimal surface preparation helping to reduce overall production costs and increase productivity.  Crestabond M1-30 has a working time of between 25 and 35 minutes.

    Available in different curing times: M1-05 / M1-20 / M1- 30 & M1-60 (5, 20, 30 & 60 minutes) and in 400ml & 50ml cartridges. Special dispensing gun available.

    Please contact +353 1 466 3786 for availability. For more information, check our Data sheet.

    Read more
  • Dispensing Gun Crestabond

    Dispensing Gun Crestabond Bonding Agent

    Co-Axial Cartridges Manual Bi-Mixer Applicator

    • Manual bi-mixer applicator for co-axial cartridges (Crestabond)
    • For use with 380ml co-axial cartridges
    • Ideal for use where there is no access to compressed air
    • This range comprises simple budget tools through to the most powerful hand applicators available.CM 380/10 for 10:1 co-axial cartridges

     

    Read more
  • Sale!

    25mm Brush

    0.786.96 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Sandpaper Sheets

    1.05 (ex vat)

    80grit sand paper is used for sanding the cured fibreglass coat – to remove sharp strands and to abrade the surface prior to laying another layer of chopped strand mat or to painting the final Topcoat. Sold per sheet.

  • Sale!

    50mm Brush

    1.289.96 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Calibrated Mixing Cups

    1.281.98 (ex vat)

    These re-usable, calibrated mixing cups are ideal for mixing GlassCast epoxy resins that require a mix ratio by volume – such as GlassCast 10 and GlassCast 50. Even when weighing your resin out, they are still a handy reusable pot for mixing resin.

  • Sale!

    Spreader – Notched

    1.295.90 (ex vat)

    Simple, reusable resin spreader perfect for spreading GlassCast epoxy resin over artwork, countertops, bartops, tables, floors and more.

  • Sale!

    75mm Brush

    1.7814.88 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    150mm (6″) Roller Handle

    2.13 1.97 (ex vat)

    Roller frame to fit our 150mm push fit refills.

    Add to basket
  • 100mm (4″) Roller Handle

    1.98 (ex vat)

    Roller frame to fit our 100mm short or long hair push fit refills.

    Add to basket
  • Sale!

    100mm Brush

    1.9818.94 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale! Masking Tape

    Masking Tape For Decorating & Building Projects

    2.98 2.65 (ex vat)

    Masking Tape Of Top Quality For Building & Decorating 

    General purpose masking tape, suitable for all kinds of jobs in the Building, Industrial, and DIY sectors.

    • Compatible with Most Common Paints & Lacquers
    • Good Adhesion on All Surfaces even on irregular substrates.
    • Easy Removal without Adhesive Residue (remove within 36 hours)
    • Hand Tearable
    • Saturated Paper Backing
    • Synthetic Rubber Adhesive
    • 50mm (2”) wide x 50mts length
    • Sold per single roll.
    Add to basket
  • Sale!

    230mm (9″Heavy duty) Roller Handle

    4.28 3.79 (ex vat)

    Heavy Duty Roller frame to fit our 225mm push fit refills.

    Add to basket
  • Sale!

    Trimming Knife

    5.90 3.95 (ex vat)

    This retractable trimming knife is simple to use and safe to store.

    • Durable aluminium body
    • Spare blade storage inside
    Add to basket
  • Sale!

    225mm (9″)Short Hair Refill (Flocoat/ Gelcoat)

    4.25 3.98 (ex vat)

    These rollers are made on 48mm diameter, polypropylene thermally bonded, acetone resistant core. Made from a velvet like polyester fibre woven into its backing for strength. This fabric will give a bubble free and fluff free finish when used for Gelcoat and Topcoat application. The 4″ and 6″ have a push on frame and the 9″ and 12″ have a cage frame for strength;

    Add to basket
  • Sale!

    225mm Long Hair Refills (Resin)

    4.25 3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket