Tools & Ancillaries

Showing all 33 results

  • Sale!

    Sandpaper Sheets

    From 0.00 (ex vat)

    80grit sand paper is used for sanding the cured fibreglass coat – to remove sharp strands and to abrade the surface prior to laying another layer of chopped strand mat or to painting the final Topcoat. Sold per sheet.

  • Sale!

    25mm Brush

    From 0.66 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Calibrated Mixing Cups

    From 0.49 (ex vat)

    These re-usable, calibrated mixing cups are ideal for mixing GlassCast epoxy resins that require a mix ratio by volume – such as GlassCast 10 and GlassCast 50. Even when weighing your resin out, they are still a handy reusable pot for mixing resin.

     

    Please note: these containers are available for collection only.

  • Sale!

    Spreader – Notched

    From 0.49 (ex vat)

    Simple, reusable resin spreader perfect for spreading GlassCast epoxy resin over artwork, countertops, bartops, tables, floors and more.

  • Sale!

    50mm Brush

    From 1.12 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    75mm Brush

    From 1.40 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    150mm (6″) Roller Handle

    1.97 (ex vat)

    Roller frame to fit our 150mm push fit refills.

    Add to basket
  • 100mm (4″) Roller Handle

    1.98 (ex vat)

    Roller frame to fit our 100mm short or long hair push fit refills.

    Add to basket
  • Sale!

    100mm Brush

    From 1.89 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • 225mm Long Hair Refills (Resin)

    3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

  • Sale!

    Trimming Knife

    3.95 (ex vat)

    This retractable trimming knife is simple to use and safe to store.

    • Durable aluminium body
    • Spare blade storage inside
    Add to basket
  • Sale!

    100mm x 17mm Mohair (Topcoat) Refill

    3.98 (ex vat)

    These short-pile refills are perfect for applying Flocoat/ Gelcoat & Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″ & 12″).

    Add to basket
  • Sale!

    100mm x 17mm Blue Stripe (Resin) Refill

    3.98 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • Sale!

    230mm (9″Heavy duty) Roller Handle

    3.98 (ex vat)

    Heavy Duty Roller frame to fit our 225mm push fit refills.

    Add to basket
  • Sale!

    300mm (12″) Long Hair Refills (Resin)

    3.98 (ex vat)

    These Long-pile 300 x 45mm (12 x 1.75″) refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types.

    • Acetone resistant
    • Good all round pick-up, performance and coverage
    • Polyester will perform well in terms of Resin loading with minimum expenditure
    • For use with screw in 300mm (12″) Lugged Frame
    • Pro Fibreglass Extention Pole – 1200-2400cm (4-8′)
    Read more
  • Sale!

    225mm (9″)Short Hair Refill (Flocoat/ Gelcoat)

    3.98 (ex vat)

    These rollers are made on 48mm diameter, polypropylene thermally bonded, acetone resistant core. Made from a velvet like polyester fibre woven into its backing for strength. This fabric will give a bubble free and fluff free finish when used for Gelcoat and Topcoat application. The 4″ and 6″ have a push on frame and the 9″ and 12″ have a cage frame for strength;

  • Sale!

    150mm x 41mm Mohair (Topcoat) Refill

    4.35 (ex vat)

    These short-pile refills are perfect for applying Flocoat/ Gelcoat & Resins. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″ & 12″).

    Add to basket
  • Sale!

    150mm x 41mm Blue Stripe (Resin) Refill

    4.35 (ex vat)

    These Long-pile refills are perfect for applying Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all resin types. Acetone resistant – push on frame (4″ & 6″ – Cage frame 9″).

    Add to basket
  • Sale!

    300mm (12″) Short Hair Refill (Topcoat/ Gelcoat)

    4.60 (ex vat)

    These Short-pile 300 x 45mm (12 x 1.75″) refill are perfect for applying Topcoat/ Gelcoat & Resin. They are non-loss so will not leave any fibre or lint behind and are compatible with all Polyester and Epoxy types.

    • Acetone resistant
    • Good all round pick-up, performance and coverage
    • They will perform well in terms of Topcoat & Resin loading with minimum expenditure
    • For use with screw in 300mm (12″) Lugged Frame
    • Pro Fibreglass Extention Pole – 1200-2400cm (4-8′)
    Read more
  • Sale!

    Hand Sander

    4.85 (ex vat)

    Professional Hand Sander

    • For use with sandpaper when smoothing all surfaces.
    • The padded surface gives improved sanding of uneven and rough surfaces
    • Simple wing nut for easy tightening and release of sandpaper securing bar.
    • Made of strong lightweight aluminium with polypropylene handle.
    • Dimensions – 240mm x 84mm
    • Lightweight handle.
    • Ideal for large surfaces such as plaster and dry wall.
    Add to basket
  • Sale!

    Frame – 300mm (12″) Screw Frame for Fibreglass Pole & 300mm Refills

    5.96 (ex vat)

    One piece cast aluminium for strength and durability. Lugged fitting accepts 8mm end cap refills. Screw-fit extension pole connection. Suitable for;

    • 300mm (12″) Polyester & Epoxy Resins, Topcoat & Gelcoat
    • 1200 – 2400mm (4 x 8) Pro Fibreglass Extention Pole
    Add to basket
  • Sale!

    50mm x 15mm Laminating Roller

    5.99 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Paper Rolls

    6.50 (ex vat)

    Ideal for both light and medium duty wiping tasks.

    Add to basket
  • Sale!

    100mm x 21mm Laminating Roller

    7.12 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    70mm x 21mm Laminating Roller

    7.30 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    100mm x 15mm Laminating Roller

    7.86 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sale!

    Corner Roller

    8.50 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool. Single wheel ‘Radius’ roller, used for corners where you need to consolidate matting or other types of reinforcements.

    Add to basket
  • Sale!

    140mm x 21mm Laminating Roller

    8.72 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Sander Head

    9.85 (ex vat)

    Lightweight head for easy sanding of roof decks. It has a universal joint which can be used at any angle and comes with a cushion pad base. It also has wing nut to secure the clamps holding in the emery paper.

    Add to basket
  • Sale!

    225mm x 21mm Laminating Roller

    12.72 (ex vat)

    These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.

    Add to basket
  • Extension Pole

    12.95 (ex vat)

    Metal extension pole supplied complete with screw on adaptor to allow easy use with tapered handle if preferred. Length 825mm. Extends to 1390mm.

    Add to basket
  • Sale!

    Fibreglass Extension Pole

    19.85 (ex vat)

    Heavy duty Fibreglass and aluminium construction.

    • 1200 x 2400mm (4-8′) length
    • Quick release “Double Click” locking mechanism.
    • Screw fit end with push-fit adapter.
    • Professional fibreglass telescopic extension pole
    • Compatible with screw thread or push in rollers and accessories
    Add to basket
  • Sale!

    Lazer Thermometer

    38.95 (ex vat)

    Mini RayTemp infrared thermometer for routine day-to-day temperature checking.

    Ideal for measuring the temperature of the OSB board prior to applying the Resin & Chopped mat.

    No guessing on the amount of Hardener required for the resin & topcoat. See Catalyst Mixing Chart

    • Compact, lightweight & easy to use
    • Temperature range -50 to 330°C
    • Laser dot alignment
    • Target ratio 12:1

    Please note this should not be used for medical purposes

    Add to basket