Resin Barrier/ Release Tape
From €0.49 (ex vat)
This special high quality tape is designed specifically for use as a barrier or release tape for industrial resins like epoxy. It is smooth, very strong, non-stretch and totally non-stick for epoxy resin making it incredibly useful for a wide range of epoxy resin applications.
Description
Tough, Self-Releasing Resin Barrier Tape for Epoxy Resin
Another great example of where having the right tools and materials can make a job so much easier!
This special high quality tape is designed specifically for use as a barrier or release tape for industrial resins like epoxy. It is smooth, very strong, non-stretch and totally non-stick, making it incredibly useful for a wide range of epoxy resin applications.
The tape is supplied on a 66m roll and is available in either 25mm (1″e;) or 50mm (2″e;). Choose the width you require from the drop-down list at the top of this page.
Resin Barrier/Release Tape Recommended Uses
There are so many ways you can use this tape with your GlassCast epoxy resin. For smaller projects the tape can be used as the resin barrier itself or for larger projects the tape can be applied to strips of any material to make a non-stick surface – perfect for turning wooden battens into non-stick resin barriers!
- Seal plastic barriers to a baseboard
- Apply to wooden battens to make non-stick barriers
- Apply to any sheet material to make a non-stick baseboard
- Seal holes or cracks in timber before a resin pour
- Wrap around wood to create a barrier for Secret Wood Jewellery
Advantages
- Very strong – will not stretch or sag
- Self-release – GlassCast won’t stick to or perish the tape
- Medium tack – sticks to most materials
- Flat and glossy – leaves a great finish
Additional information
Weight | 0.25 kg |
---|---|
Size | Resin Barrier/ Release Tape 25mm (1"), Resin Barrier/ Release Tape 50mm (2") |
Specification
Specification
Maximum Use Temperature | 180°C |
Carrier Type | Polyester (PET) |
Adhesive Type | Silicone |
Colour | Green |
Roll Length | 66m |
Roll Width | 25mm or 50mm |
Nominal Total Thickness | 0.064mm |
Nominal Film Thickness | 0.025mm |
Adhesion to Steel | 3.3 N/cm-width |
Tensile Strength | 80 N/cm-width |
Elongation at Break | 60% |
Shelf-Life | 12 months |
Storage Conditions | 22°C |
How long is one coil?
The roll length is 66 metres.
Can I line the inside of the mould for making a River Table with this Tape?
Yes the tape can be used in this way. However, it will leave slight edge lines where the edge of the tape is which will need to be sanded and polished out of the finished table for the very smoothest of finishes.