Shop

Showing 33–48 of 212 results

  • Catalyst

    1.9749.95 (ex vat)

    All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100ml eg: 1kg = 10 x 100ml. For large quantities, please contact us on +353 1 466 3786.

  • Summer Catalyst

    1.9748.50 (ex vat)

    All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In Order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100ml eg: 1kg = 10 x 100ml. For large quantities, please contact us on +353 1 466 3786.

  • Winter Catalyst

    1.9759.85 (ex vat)

    Winter Catalyst (HBO-50) has been specifically designed for addition to CrysticCOOL Cure Resin and topcoats to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. It can also be added to other polyester resins / Gelcoats and Topcoats – but it will be similar to the summer catalyst cure times. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100ml eg: 1kg = 10 x 100ml containers. For large quantities, please contact us on +353 1 466 3786.

  • Sale!

    150mm (6″) Roller Handle

    2.13 1.97 (ex vat)

    Roller frame to fit our 150mm push fit refills.

    Add to basket
  • 100mm (4″) Roller Handle

    1.98 (ex vat)

    Roller frame to fit our 100mm short or long hair push fit refills.

    Add to basket
  • Sale!

    100mm Brush

    1.9818.94 (ex vat)

    These low cost brushes are designed for use in fibreglass (good for laminating and topcoating). Completely resistant to resins and acetone. Can be cleaned. White bristles and wooden handles. Sold single or box of 12.

  • Sale!

    Chopped Strand Mat 300gm

    2.36126.74 (ex vat)

    The most common fiberglass reinforcement used with Polyester resin for hand lay-up. The Glassfibre strands are randomly arranged and held together by an emulsion binder to form a mat. Available in various thickness 300gm /450gm (for Boat & general repairs) 600gm/m2 (recommended for Roofing) – approx 1mt wide. Chopped Mat lends itself to most laminating jobs including Boat Building / Roofing / Ponds / Car-Truck body repairs etc. Lloyds approved

  • Sale!

    Chopped Strand Mat 450gm

    2.36126.70 (ex vat)

    The most common fiberglass reinforcement used with Polyester resin for hand lay-up. The Glassfibre strands are randomly arranged and held together by an emulsion binder to form a mat. Available in various thickness 300gm /450gm (for Boat & general repairs) 600gm/m2 (recommended for Roofing) – approx 1mt wide. Chopped Mat lends itself to most laminating jobs including Boat Building / Roofing / Ponds / Car-Truck body repairs etc. Lloyds approved

  • Sale!

    Chopped Strand Mat 600gm

    2.36126.70 (ex vat)

    The most common fiberglass reinforcement used with Polyester resin for hand lay-up. The Glassfibre strands are randomly arranged and held together by an emulsion binder to form a mat. Available in various thickness 300gm /450gm (for Boat & general repairs) 600gm/m2 (recommended for Roofing) – approx 1mt wide. Chopped Mat lends itself to most laminating jobs including Boat Building / Roofing / Ponds / Car-Truck body repairs etc. Lloyds approved

  • Sale! Curl Pigments

    Solid Colour Pigments – 20ml

    2.465.79 (ex vat)

    Super-concentrated, solid colour liquid pigments used to add strong, vibrant, opaque colour to resin for projects including resin flow art, countertops, decorative flooring, wood inlays, resin castings and more.

    Please Note: 20ml of colour pigment will do up to 5kg GlassCast Resin

  • Surface Tissue

    2.502.98 (ex vat)

    A Glassfibre tissue (35gm/m²) used for a final layer on top of Chopped Mat to obtain an improved finish. It is also used to improve chemical resistance on a gelcoat or topcoat surface, ensuring an even thickness, freedom from cracking, and a long life product – Or applied to dry Gelcoat to cover up the coarse glass pattern and form a smooth surface for the flowcoat to be applied. Uses 100g of resin per m². Supplied per meter / 1mt wide.

  • Talc Fillers

    2.5039.80 (ex vat)

    Talc is an all-purpose inexpensive filler powder which is used to make resin into a bodyfiller. Also used in resin casting to reduce cost, shrinkage and heat generated by resin curing. Catalyst should be added before filler powder. Dark grey in colour.

  • Sale! Masking Tape

    Masking Tape For Decorating & Building Projects

    2.98 2.65 (ex vat)

    Masking Tape Of Top Quality For Building & Decorating 

    General purpose masking tape, suitable for all kinds of jobs in the Building, Industrial, and DIY sectors.

    • Compatible with Most Common Paints & Lacquers
    • Good Adhesion on All Surfaces even on irregular substrates.
    • Easy Removal without Adhesive Residue (remove within 36 hours)
    • Hand Tearable
    • Saturated Paper Backing
    • Synthetic Rubber Adhesive
    • 50mm (2”) wide x 50mts length
    • Sold per single roll.
    Add to basket
  • Sale!

    230mm (9″) Roller Handle

    3.06 2.68 (ex vat)

    Roller frame to fit our 225mm push fit refills.

    Add to basket
  • Sale! Plastic Squeeze Bottle

    Plastic Squeeze Bottle with Angled Straw

    2.984.87 (ex vat)

    Plastic Squeeze Bottle with Angled Straw for Dispensing Water

    Plastic wash bottles with Swan neck and a fine control tip. Ideal for washing down. Polypropylene screw closure with its angled stem and draw tube moulded in one piece for leak-proof applications

    Available in three sizes; 250ml, 500ml & 1000ml.

  • Sale! Silicone Oil

    Celz Silicone Oil 50ml for GlassCast Epoxy Resins

    4.20 3.35 (ex vat)

    High quality silicone cell dispersion media for use in epoxy resin art to create amazing cells and lacing effects

    Add to basket