Shop

Showing 1–16 of 213 results

  • Roofing Topcoat

    Roofing Flocoat is available standard Dark Grey and other colours like Light Grey and RAL 8400 are also available. Sizes 0.5kg/ 1kg/ 2.5kg/ 5kg/ 10kg/ 15kg/ 20kg. Please view our Roofing section for quantities and prices. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Read more
  • Roofing Topcoat

    Roofing Flocoat is available standard Dark Grey and other colours like Light Grey and RAL 8400 are also available. Sizes 0.5kg/ 1kg/ 2.5kg/ 5kg/ 10kg/ 15kg/ 20kg. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. Please view our Roofing section for quantities and prices.

    Read more
  • Premier CrysticROOF Topcoat

    The CrysticROOF Premier Topcoat meets BS476 Part 3 for all roof structures and shapes including: flat, valley and pitched roofs, walkways, roof-lights and balconies. When correctly applied, it provides long term UV resistance and weathering performance, remaining watertight and maintenance-free for many years.

    CrysticROOF ‘BBA Premier’ is only available from a fully trained accredited CrysticROOF installer and comes with a 25 year materials guarantee (to qualify to become an approved CrysticROOF Premier installer you must attend a one day Training Course).

    The CrysticROOF range of cold-applied GRP roofing products was developed specifically for new flat and pitched roof designs. It is a fully BBA approved flat roofing system, which now includes a fire resistant (FR) isophthalic topcoat as standard, helpings installers and contractors avoid the risk of not meeting fire safety legislation and building regulations. Available in Dark Grey (RAL 7015) as standard. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Read more
  • Premier CrysticROOF Resin

    CrysticROOF ‘BBA Premier’ is a cold-applied GRP roofing system, fully BBA approved, which is proven as a long-lasting, leak-free alternative to traditional roofing materials, such as bitumen, felt and lead, and comes with a 25 year Guarantee if installed by a certified contractor (to qualify to become an approved CrysticROOF Premier installer you must attend a one day Training Course). Please Note: We can only sell the Premier System (Resin + Topcoat) to Certified Contractors.
    The CrysticROOF BBA Premier Resin system is specifically designed for producing seamless flat and pitched roofs, balconies, dorma windows and walkways, along with specialist Fire rated (achieves BS476 part 3) and cold weather CrysticROOF topcoat products.
    Manufactured from virgin raw material this Roofing Resin has a colour change system to show that catalyst addition has taken place. It also incorporates a Low Styrene Emission (LSE) technology, which minimises odours. For General Health Information see section on hazards.

    Read more
  • Crestabond M1-30 Bonding Agent

    Crestabond M1-30 Bonding Agent

    Crestabond® M1-30

    Crestabond M1-30 is a toughened, two component 10:1 MMA structural adhesive which is designed for bonding a wide range of substrates including metals, plastics and composite materials in industrial applications.

    This adhesive demonstrates excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive, requiring minimal surface preparation helping to reduce overall production costs and increase productivity.  Crestabond M1-30 has a working time of between 25 and 35 minutes.

    Available in different curing times: M1-05 / M1-20 / M1- 30 & M1-60 (5, 20, 30 & 60 minutes) and in 400ml & 50ml cartridges. Special dispensing gun available.

    Please contact +353 1 466 3786 for availability. For more information, check our Data sheet.

    Read more
  • Dispensing Gun Crestabond

    Dispensing Gun Crestabond Bonding Agent

    Co-Axial Cartridges Manual Bi-Mixer Applicator

    • Manual bi-mixer applicator for co-axial cartridges (Crestabond)
    • For use with 380ml co-axial cartridges
    • Ideal for use where there is no access to compressed air
    • This range comprises simple budget tools through to the most powerful hand applicators available.CM 380/10 for 10:1 co-axial cartridges

     

    Read more
  • 600/300gm Combination Mat (1.25mt wide)

    0.0012.95 (ex vat)

    Fabric consisting of 600g bi-directional Woven Roving stitched with Polyester Yarn to 300gm Chopped Strand Mat. Used for building layers rather than individual materials separately. Extremely Strong and time saving.

  • 600gm Woven Roving

    0.008.50 (ex vat)

    Glass fibre filaments, spun into a yarn then woven to make a cloth. It provides great strength with minimal thickness. Used as an alternate layer between Chopped Mat. Easy to wet out and drapes well.

  • Chopping Rovings (per 20kg roll)

    Used for spray laminating, the continuous roving is chopped in the spray gun & deposited together with resin on the mould. Available in rolls of approx. 20kgs

    Read more
  • Coloured Gelcoat

    0.00 (ex vat)

    Coloured Gelcoat to RAL 840 Colours – Available in 0.5kg/ 1kg/ 2.5kg/ 5kgs/ 20kgs. Please phone 00353 1 466 3786 for availability and price. Please NoteCatalyst (hardener) must also be added to the Topcoat in order for it to cure.For General Health Information see section on hazards.

    Add to basket
  • Coloured Topcoat

    0.00 (ex vat)

    Coloured Gelcoat to RAL 840 Colours – Available in 0.5kg/ 1kg/ 2.5kg/ 5kgs/ 20kgs. Please phone 00353 1 4663786 for availability and price. Please Note: Catalyst  (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Add to basket
  • Slip Resistant Topcoat

    0.00 (ex vat)

    Similar to Flocoat but with the addition of a slip resistant finish. The flocoat can be applied to an area where a degree of slip resistance is required i.e. Decks and walkways of Roofs/ Balconies/ Boats & Steps. Available in a variety of colours. Please phone 00353 1 4663786 for availability and price. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

    Add to basket
  • Special Purpose Resins

    0.00 (ex vat)

    Isophthalic and Vinyl ester Resin – Chemical Resistant resin – Fire retardant resin – Please contact us on +353 1 466 3786 for price and availability.

    Add to basket
  • Coremat

    0.00 (ex vat)

    Coremat is a polyester nonwoven that contains microspheres and is used as a thin core (bulker mat) or print blocker (liner) in fibre reinforced laminates, manufactured in Hand Lay-Up or Spray-Up processes. Coremat should always be fully impregnated with resin and the microspheres in Coremat prevent excessive resin up-take. Please contact us on +353 1 466 3786 for price and availability.

    Add to basket
  • Core-Cell®

    0.00 (ex vat)

    Core-Cell® is the leading structural foam core material, which has become widely accepted for the construction of large, high performance structures. Please contact us on +353 1 466 3786 for price and availability.

    Read more
  • Colour Chart & Pigments

    0.00 (ex vat)

    MID Glassfibre Supplies Ltd have a specific Gel / Flocoat colour mixing machine where we can mix any quantity – down to 0.5kg as required. Please view our RAL 840hr colour chart. Please note: Do not use website images for colour-matching, as colours can vary widely on different monitors. Also, this can only be used as a guide line – we do not stock every colour. Contact our sales department +353 1 466 3786 for further advice and pricing.

    Read more