0.5kg

Showing all 9 results

  • Talc Fillers

    2.5039.80 (ex vat)

    Talc is an all-purpose inexpensive filler powder which is used to make resin into a bodyfiller. Also used in resin casting to reduce cost, shrinkage and heat generated by resin curing. Catalyst should be added before filler powder. Dark grey in colour.

  • Carborundum grit – Slip Resistant Grit

    7.98119.75 (ex vat)

    Carborundum grit is used to produce an extremely hardwearing slip resistant surface. It can come pre-mixed Slip Resistant Topcoat or sprinkled onto a final flocoat or resin surface while still wet (pre-mixed looks better). Especially useful on workboats where abrasion to the GRP laminate is caused by ropes and chains. Also on Roofs/ Balconies and steps where a degree of slip resistant is required. Supplied as Grade 24 (medium grade). Other grades (Fine 36 grade & Course 12 grade) are available on request.

  • Sale! polyester resin glassfibre.ie online shop

    Polyester Resin

    7.98112.75 (ex vat)

    Polyester Resin is suitable for Boat building/ Car/ Tractor/ Truck/ Pond & Marine repairs. Can be bought online with next day delivery. Lloyds approved. Used in conjunction with Chopped strand mat and other reinforcements. Other types of Polyester and Epoxy Resins are available, like Roofing/ Casting etc.

    This is a general purpose top quality orthophthalic polyester resin which requires the addition of 1% – 4% MEKP Catalyst / hardener (included up to 10kgs) to make it set. See our catalyst mixing chart. Suitable for making car bodies, boats, general repair work. Lloyds approved. Used in conjunction with Chopped strand mat and other reinforcements. Please note: if you require a Roofing resin, visit our CrysticROOF Resins. Unlike other distributors our roofing resins are specifically designed and very much easier to use than GP Resins – Please check out the CrysticROOF technical data sheet. For General Health Information see section on hazards.

  • Sale!

    White Virgin Aluminium Oxide – Slip Resistant Grit

    8.90128.60 (ex vat)

    White Aluminium Oxide

    White aluminum oxide is used as a durable and efficient non-skid media. The white color minimizes the ‘darkening’ or ‘dilution’ of colored coatings. The angular shape of aluminum oxide makes it an ideal grit for use in a variety of non-skid applications including concrete floors, stairs and boat decks. The inert nature of aluminum oxide allows it to be used with a variety of coating materials. The hardness of the grit particle creates a durable, long-lasting surface that requires minimal maintenance.

    The grit is used to produce an extremely hardwearing slip resistant surface. It can come pre-mixed or sprinkled onto a final flocoat or resin surface while still wet (pre-mixed looks better). Especially useful on workboats where abrasion to the GRP laminate is caused by ropes and chains. Also on Balconies and steps where a degree of slip resistant is required. Supplied as Grade 24 (medium grade).

  • Sale!

    6mm Chopped Strands

    8.9557.50 (ex vat)

    Supplied in 6mm lengths and used for reinforcing the Gelcoat in the mould / gap filling / polyester putty. Also used as a fillet “sprinkled” into sharp internal corners during laminating.

  • Sale!

    Clear Polyester Gelcoat

    11.65160.22 (ex vat)

    High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours.                                              Please NoteCatalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.

  • Sale!

    Clear Polyester Topcoat

    13.86176.55 (ex vat)

    Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. – Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.

  • Sale!

    White Polyester Gelcoat

    14.45170.93 (ex vat)

    High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please NoteCatalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.

  • Sale!

    White Polyester Topcoat

    14.95189.75 (ex vat)

    Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.