1kg
Showing all 22 results
-
Sale!
Summer Catalyst
From €1.97 (ex vat)All resins, gelcoats and topcoats must have catalyst (hardener) added to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.
-
Talc Fillers
From €2.50 (ex vat)Talc is an all-purpose inexpensive filler powder which is used to make resin into a bodyfiller. Also used in resin casting to reduce cost, shrinkage and heat generated by resin curing. Catalyst should be added before filler powder. Dark grey in colour.
-
Fillite
From €2.50 (ex vat)An excellent lightweight filler consisting of tiny hollow microspheres. Good for initial filling of large areas and easier than talc to sand down. Resin dramatically increases in volume when mixed with fillite. Also used for bedding down timber and steel ribs to the laminate.
-
Sale!
Winter Catalyst
From €1.97 (ex vat)Winter Catalyst (HBO-50) has been specifically designed for addition to CrysticCOOL Cure Resin and topcoats to start the curing process. The amounts vary between 1% – 4% by weight depending on the required cure time and temperature. It can also be added to other polyester resins / Gelcoats and Topcoats – but it will be similar to the summer catalyst cure times. Please view our Catalyst mixing chart. Catalyst is a corrosive material and must be handled with special care. Dispensers are strongly recommended for safe and accurate use. See section on hazards. Please Note: In order to comply with ADR Limited Quantity (Carriage of Dangerous Goods by Road) we can only ship in maximum units of 100gm eg: 1kg = 10 x 100gm. For larger quantities, 2.5kg, 5kg & 25kg please contact us on + 353 1 466 3786 as we are unable to dispatch these sizes through our normal couriers, they require Haz Chem drivers. The goods are in stock and available for collection if required.
-
Sale!
6mm Chopped Strands
From €8.65 (ex vat)Supplied in 6mm lengths and used for reinforcing the Gelcoat in the mould / gap filling / polyester putty. Also used as a fillet “sprinkled” into sharp internal corners during laminating.
-
Sale!
Polyester Resin (Lloyds Approved)
From €7.50 (ex vat)Norsodyne H 13212 TAE is a general purpose polyester resin that is suitable for a wide range of applications, including: Marine, Roofing, Auto Repairs, Pond & Wet-Room Tanking.
-
Sale!
Carborundum grit – Slip Resistant Grit
From €7.98 (ex vat)Carborundum grit is used to produce an extremely hardwearing slip resistant surface. It can come pre-mixed Slip Resistant Topcoat or sprinkled onto a final flocoat or resin surface while still wet (pre-mixed looks better). Especially useful on workboats where abrasion to the GRP laminate is caused by ropes and chains. Also on Roofs/ Balconies and steps where a degree of slip resistant is required. Supplied as Grade 24 (medium grade). Other grades (Fine 36 grade & Course 12 grade) are available on request.
-
Sale!
Clear Polyester Gelcoat
From €10.89 (ex vat)High quality marine grade (Lloyds approved) brush Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Available in a variety of RAL 840 colours. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure.Please contact +353 1 466 3786 for availability and price. For General Health Information see section on hazards.
-
Sale!
White Virgin Aluminium Oxide – Slip Resistant Grit
From €8.90 (ex vat)White Aluminium Oxide
White aluminum oxide is used as a durable and efficient non-skid media. The white color minimizes the ‘darkening’ or ‘dilution’ of colored coatings. The angular shape of aluminum oxide makes it an ideal grit for use in a variety of non-skid applications including concrete floors, stairs and boat decks. The inert nature of aluminum oxide allows it to be used with a variety of coating materials. The hardness of the grit particle creates a durable, long-lasting surface that requires minimal maintenance.
The grit is used to produce an extremely hardwearing slip resistant surface. It can come pre-mixed or sprinkled onto a final flocoat or resin surface while still wet (pre-mixed looks better). Especially useful on workboats where abrasion to the GRP laminate is caused by ropes and chains. Also on Balconies and steps where a degree of slip resistant is required. Supplied as Grade 24 (medium grade).
-
Mixing Pumps
From €13.75 (ex vat)Each pump body of the pair is identical and will fit either container of the SP 1kg / 3kg /11.8 /23.6kg SP106, SP320 and SP115. However, each pump of the pair is fitted with an extension tube of correct length to reach exactly to the bottom of one container, so that there is a resin pump’ and a hardener pump’.
-
Sale!
Clear Polyester Topcoat
From €12.96 (ex vat)Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
White Polyester Gelcoat
From €13.50 (ex vat)High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please Note: Catalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.
-
Sale!
White Polyester Topcoat
From €13.98 (ex vat)Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
Easy Composites EL2 Epoxy Resin (Laminating Resin)
From €29.96 (ex vat)EL2 is a high performance epoxy laminating resin suitable for hand-layup of reinforcements such as carbon fibre, aramid and glass fibre. Its combination of mechanical performance, fast wet-out, easy handling and great value make EL2 a hugely popular choice in motorsport, boat-building, model-making and general composites.
Sold as a kit (kit weight = combined weight of resin and hardener). Available to buy online in 500g, 1kg & 5kg kits.
