A200 Facia Trim (95 x 90mm)
€18.92 – €20.68 (ex vat)
Drip trims are fitted to the lowest edge of the roof where water will flow into the gutter. Two support battens should be fitted to the fascia to sit under the trim to allow a space for the gutter to fit behind the trim. Fix ALL adhesive should be used to bond the trim to the batten on the vertical face, and nails used to fix the horizontal face onto the roof decking.
Don’t nail through the face of the trim – this will show through the final topcoat finish on the front face. To join two lengths together simply overlap (by 50mm) and slot two pieces together using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape.
Fitted to the roof edges to allow drainage into the gutter.
- A170 (75 x 84mm)
- A200 (95 x 90mm) – (Standard and in stock – this is what we will ship)
- A250 (95 x 140mm) – (In stock – please phone 01 466 3786 to purchase)
- A200 (90 x 90mm) – (same A200, but with drip return)
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).
No FAQ Found