TriRoof HPX is the ultimate Roofing Overlay System. This system has been designed to work in all four seasons. From colder temperatures to increased heat, TriRoof HPX will apply effortlessly. TriRoof HPX can also be applied to damp surfaces meaning the weather never has to hold you back!
This product requires no additional hardener or mixing. It can be applied straight out of the tin. This product is supplied as 1 x 14kg tin.
Benefits of TriRoof HPX
- Works even when it’s raining – applies flawlessly to damp surfaces
- Use it straight out of the tin – no mixing/no additional hardener
- Applies to most common substrates – rubber. concrete, grp, asphalt
- Environmentally friendly (free from isocyanates and bitumen)
- Tack-free in 2-4 hours
- 10 & 20-year material guarantee options (depending on application method)
*20 Year Guarantee Repair any leaks with HPX and TriRoof CSM 450gm Bandage consolidated. Then apply 1 Layer of HPX (1.6kg – 1.8kg per sqm depending on substrate) with TriRoof 225g CSM consolidated followed up with a 1kg -1.2kg sqm final coat after first layer has dried.
*10 Year Guarantee Repair any leaks with HPX and TriRoof CSM 450gm Bandage consolidated then 1 layer of HPX (1.6kg – 1.8kg sqm depending on substrate)
The surface needs to be clean and sound, free of any contamination, which may harmfully affect the adhesion of the coating. The surface must also be thoroughly cleaned from water puddles, prior to application. Remove all loose materials. New concrete structures need to dry for at least 28 days. Old coatings, dirt, fats, oils, organic substances and dust need to be removed by a grinding machine. Any loose surface pieces and grinding dust need to be thoroughly removed. Avoid standing water.
Apply TriRoof HPX Hybrid Polymer Liquid Membrane, ready-to-use, evenly and completely enclosed in one or two layers, manually with a roller or brush. Spread or pour in lanes directly on the surface and subsequently spread through a short pile roller (roller for epoxy/polyurethane paints). The second layer is applied after complete drying of the first layer. It is highly recommended to apply the second layer on the next day. Furthermore, it can be applied with a flat trowel for horizontal surfaces. In particularly crack-prone or other problem areas, like wall floor connections, 90° angles, chimneys, pipes and waterspouts (siphon), the application of the geotextile FABRIC, soaked and saturated in TriRoof HPX Hybrid Polymer Liquid Membrane, in the first wet layer, is recommended. Press FABRIC firmly with a roller. The second layer is applied over FABRIC, after complete drying of the first layer. In order to increase the adhesion of the tile adhesive, usage of quartz by spreading to TriRoof HPX Hybrid Polymer Liquid Membrane is highly recommended.
Indicatively: 0.27 – 0.31 lb/ft2 (1.3 – 1.5 kg/m2) in one or two layers, in approx. 0.04’’ (1 mm) thickness. Recommended coverage, in total, 0.53 – 0.61 lb/ft2 (2.6 – 3 kg/m2 ) (without the use of FABRIC)
Storage and Shelf Life:
• Protected from water, frost and adverse air conditions • Keep dry and cool on wooden pallets at between +10oC and +25oC in moisture free conditions • The opened products should be consumed immediately • Shelf life is maximum 9 months conditional to complying with the aforementioned storage conditions
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.