Shop
Showing 97–112 of 220 results
-
Sale!
225mm x 21mm Laminating Roller
€12.72 (ex vat)These tools are used to remove air bubbles and “squeezing”” the GRP laminate into an integral structure. The use of these metal rollers also reduces unnecessary over wetting of the laminate which saves money and time. Rollers are supplied in various shapes all attached to a steel spindle with high grade plastic handles similar to decorating handles, but all do the same job. Most rollers will accept an extension handle. Must be cleaned in acetone before the resin hardens. A useful and necessary tool.
-
Nitrile Gloves (XL) Box of 100
€12.95 (ex vat)Box of 100 lightly powdered X large nitrile gloves. These are tough, sensitive, non-sterile gloves with many uses. Ambidextrous with beaded cuff. Size: XL
-
Sale!
Hand Cleaner
From €12.95 (ex vat)Kleen-All Paste is a pleasant and easy to use general purpose hand cleanser that has become established as the market leader in products designed for the safe and effective removal of the most stubborn contaminates.
Designed for use by Industry Professionals such as: – Paint Sprayer Engineers, Print Workers Mechanics, Fibreglass users, where it is difficult to clean dirty hands without resorting to the use of harsh solvents which defat the skin and can cause irritations, skin cracks and dermatitis.
Kleen-All is a blend of powerful but gentle surfactants together with DBE (dibasic ester) and non abrasive polygrains for rapid cleaning action.
Feature & Benefits;
- Removes ALL PAINTS including 2 pack type
- Removes RESINS, PIGMENT and ADHESIVES
- Removes INKS, GREASE and GRIME.
- No need to use harmful solvents.
- Citrus fragrance.
- Leaves hands clean and refreshed.
- Economic in use.
-
Sale!
Catalyst Dispensers
From €8.96 (ex vat)These Liquid Dispensing bottles are moulded from a durable, high grade flexible polypropylene which allows for single handed operation and are calibrated to an accuracy of 0.5ml. They will safely dispense catalyst into the engraved output chamber. 15ml bottle dispenses 1 – 15ml and holds 500ml. 80ml bottle dispenses 10-80ml and holds 1000ml. Note: 1ml = 1cc = 1mg. Please view our Catalyst mixing charts and our section on Health & Safety.
-
Extension Pole
€12.95 (ex vat)Metal extension pole supplied complete with screw on adaptor to allow easy use with tapered handle if preferred. Length 825mm. Extends to 1390mm.
-
Sale!
White PVC Apron
€12.96 (ex vat)Suitable against chemical & Fluid splash
- Provides good abrasion resistance
- Offers some chemical resistance
- Flexible, light and tough
- One size fits all
- Sold and packaged individually
-
Mixing Pumps
From €13.75 (ex vat)Each pump body of the pair is identical and will fit either container of the SP 1kg / 3kg /11.8 /23.6kg SP106, SP320 and SP115. However, each pump of the pair is fitted with an extension tube of correct length to reach exactly to the bottom of one container, so that there is a resin pump’ and a hardener pump’.
-
Sale!
Clear Polyester Topcoat
From €12.96 (ex vat)Similar to gelcoat but with the addition of solution MW Wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a surfboard or in wooden boat sheathing or gelcoat boat repairs. Available in a variety of RAL 840 Colours. Please note: if you require a Roofing Topcoat please look at our CrysticROOF Topcoat – Unlike other distributors our roofing topcoats are specifically designed for use on Roof / Balconies / Valleys and are very much easier to use than ordinary topcoat. Check out the CrysticROOF Topcoat technical data sheet. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
-
Sale!
F300 Flat Flashing
From €9.87 (ex vat)The ‘F’ trim range consists of flat flashing with three different widths. These trims are supplied as 20 metre rolls, and are mainly used where a pitched roof meets a flat roof. It should be nailed onto the roof deck and bent up the pitched roof slope being placed under the existing roof felt and tiles. If only fixed at the base in this manner, the trims will also act as an expansion trim.
The F trims can also be used around vertical details. Any nails and joints should be taped and resin covered, the remainder of the trim can simply be top-coated during that stage of installation.
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
Please note the F300 is sold by (metre x unit price)
All 20 metre rolls:
- F300 – 300mm x 20m roll (standard and in stock)
- F600 – 600mm x 20m roll
- F900 – 900mm x 20m roll
-
Sale!
Precision Mini Scale
From €0.49 (ex vat)Precision Mini Scale
Mini digital scale with extra accuracy down to 0.1g specially for weighing smaller quantities of resins, hardeners and pigments where extra accuracy is needed.
Perfect for jewellery makers, model-makers and in fact anyone generally working with smaller quantities of resins and pigments!
-
Sale!
White Polyester Gelcoat
From €13.50 (ex vat)High quality marine grade (Lloyds approved) brush White Isophthalic gelcoat, which sets with a tacky surface on the exposed side. This gelcoat has excellent physical properties, water resistance and UV light stability. Used to produce the resin rich layer on the mouldings and is applied directly to the release agent. Please Note: Catalyst (hardener) must also be added to the Gelcoat in order for it to cure.For General Health Information see section on hazards.
-
Sale!
White Polyester Topcoat
From €13.98 (ex vat)Similar to gelcoat but with the addition of White pigment and solution MW wax. This enables the Gelcoat to be applied on the exposed side as a resin rich outer layer without a tacky finish. With its excellent physical properties, water resistance and UV light stability it is ideally suitable for the finishing coat to a variety of surfaces including boat repairs. Please Note: Catalyst (hardener) must also be added to the Topcoat in order for it to cure. For General Health Information see section on hazards.
