Shop
Showing 145–160 of 220 results
-
Kevlar
€27.50 – €36.50 (ex vat)Kevlar is high in tensile strength and low in weight / High toughness / Flame & chemical resistance. Used specifically with Epoxy Resin. Uses Motor parts / Kayaks / Body armour due to its high strength / weight ratio. 175gm Plain Weave
-
Sale!
ET500 Structural Epoxy Adhesive
€28.76 (ex vat)ET500 is a fast curing, clear, rigid two-part engineering grade epoxy structural adhesive. ET500 has very good bond strength to a wide variety of substrates including metals, composites, wood, ceramics and some plastics.
5min cure. Supplied in a twin cartridge pack (1:1 ratio, resin and hardener).
-
Sale!
Carbon/ Kevlar
€29.75 (ex vat)The carbon will provide the stiffness required whilst the Kevlar will provide the impact and abrasion resistance. 210gm Fabric. Uses Motor sport / Marine applications. This cloth has good drape-ability and is easy to handle.
Sold per square meter.
-
Sale!
Polypropylene Sheet – 100 x 100cm
€29.89 (ex vat)Polypropylene plastic sheet is ideal for use as a non-stick baseboard or barriers for your GlassCast epoxy resin projects. It has a smooth finish and is easy to cut and bond. Use it to create a base or sides for a river table or custom shaped containers for jewellery or wood turning projects.
-
Sale!
G4 Pond Sealer (Clear)
€34.50 – €92.75 (ex vat)Deep bonding plastic coating for concrete, quick and simple.
No Primer needed, can be used at low temperatures. Seal out lime.
G4 Pond Seal is a one component polyurethane which forms a non-porous, tough, durable but flexible seal. It is browny translucent in colour. Seals porous substrates such as concrete and brick. G4 will not seal concrete or lightweight blocks, these need to be rendered before application. When used for sealing ponds, any substrate below the water line must be cement rendered. G4 can be used at low temperatures, down to 0°c and in areas of relative high humidity. G4 cannot be used on bitumen of pond liners.
-
Sale!
Lazer Thermometer
€38.95 (ex vat)Mini RayTemp infrared thermometer for routine day-to-day temperature checking.
Ideal for measuring the temperature of the OSB board prior to applying the Resin & Chopped mat.
No guessing on the amount of Hardener required for the resin & topcoat. See Catalyst Mixing Chart
- Compact, lightweight & easy to use
- Temperature range -50 to 330°C
- Laser dot alignment
- Target ratio 12:1
Please note this should not be used for medical purposes
-
Carbon Fibre
€39.50 – €162.50 (ex vat)Carbon Fibre is used in composites with lightweight matrix. It is ideally suited to applications where strength / stiffness and low weight ratio are required. Uses Aerospace / Motor industry / Military / Structural. 200gm 2 x 2 Twill – 1mt wide
-
TriCast 10 Crystal Clear Epoxy Casting Resin
€39.86 – €528.76 (ex vat)TriCast 10 – Fully transparent epoxy resin coating for Bar Tops, Countertops, Table Tops, Fine Art Paintings, Collages, Canvas, Furniture, Jewellery, Photos, Arts & Crafts.
100% Crystal Clear Castings up to 10mm in depth. BPA (Bisphenol A) free.Suitable for applications in art and decoration to make transparent objects from 1 mm up to 10 mm such as thin inclusions, embeddings, wood surface sealing and coatings.
Resin Properties
• High transparency
• Fast Cure
• Low viscosity
• Self-degassing behaviour
• Single pour casting up to 10 mm
• Strong UV resistance -
TriCast 50 Crystal Clear Epoxy Casting Resin
€39.86 – €528.76 (ex vat)TriCast 50 – Epoxy Resin for Deep Pours in applications such as River Resin Tables
100% Crystal Clear Casting Resin
TriCast 50 is suitable for single, deep pours up to 50mm and is suitable for a variety of applications including furniture-making e.g. River Resin Tables
Resin Properties
• High transparency
• Low viscosity
• Self-degassing behaviour
• Single pour casting up to 50 mm
• Good UV resistance -
Sale!
3M 4251 Respirator
€46.75 (ex vat)Maintenance free design for maximum safety and simplicity. Low resistance parabolic valve to reduce heat build-up. Soft/Non-allergenic face piece material. Supplied in a hermetically sealed foilbag to extend shelf life and prevent contamination. Meets european standard EN405:2002 for valved filtering half mask respirators for gases or gas and particulate combinations.
- Organic vapour and particulate respirator
- Unique design with integral filters
- Exempt from the maintenance requirements of coshh regulations if disposed of within the month
- Flexible, soft, non-allergenic face piece
- Exhalation valve for effective removal of heat and moisture build up
- Resealable bag provides clean and convenient storage between uses
-
Sale!
Petri Dish Art Starter Kit
€49.60 (ex vat)Create your own stunning petrified rainbows with the Petri Dish Art Starter Kit in the form of coasters or mini pieces of art! This kit includes everything you need for this project – epoxy resin, alcohol inks, mould and accessories.
