Shop
Showing 113–128 of 220 results
-
Sale!
White Disposable Suit XL
€14.95 (ex vat)Disposable Boiler Suit to protect that has been designed to allow breathability whilst offering protection against splash and hazardous dusts.
Hooded coverall.
• Robust, yet lightweight.
• 3 piece hood.
• Elasticated face, wrist and ankles.
• Excellent barrier to fine particles and fibres.
• Ultra-low linting.
• Stitched external seams.
• Suitable for pharmaceutical, chemical processing, oil and gas industry, maintenance spray painting and many other applications.• Conforms to: CAT III, TYPE 5B, 6B. EN 1073-2, EN 1149-5, EN14126
-
Sale!
Neon Tinting Pigments for GlassCast Epoxy Resin
€15.88 (ex vat)Set of 6 stunning neon pigment colours (fluorescent / day-glow) translucent tinting pigment intended to add a vivid bright neon colour to clear casting resins like GlassCast, ArtResin and most other polyester, polyurethane and epoxy casting resins. The neon tints also glow under UV light to produce dramatic effects.
Only a few drops of these special day-glow tints are needed to add translucent colour effects to resin castings and so each 25ml bottle is sufficient to tint large quantities of resin.
The pigments can only be sold in a pack of 6 Neon colours;
Colours: 25ml Red / 25ml Green / 25ml Blue / 25ml Pink / 25ml Yellow / 25ml Orange
-
C1, C2, C3 & C4 Corner Trims
€15.95 – €18.92 (ex vat)Corner trims should be fixed to the deck with nails, and joined to the edge trims using Fix ALL adhesive. Any joints and nail heads should be taped over, resin applied and consolidated before laying the main laminate. Corner trims may need to be trimmed to size if using the shorter height profile edge trims – they are designed to fit all depths, so will need to be cut back to match the exact trims you are using.
- C1 Universal External Corner Trim – Forms a left or right hand corner. Use with A and B range trims. (Standard and in stock)
- C2 Fillet to Corner Trim – Use where a flat roof meets an abutting wall. Use with A, B and D260 trims.
- C3 External or Internal Fillet Corner trims – Used as a preformed external or internal corner. Avoids mitring in situ. Use with a D260.
- C4 Universal Internal Corner Trim – Forms a left or right hand corner. Use with A and B range trims.
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
-
Sale!
C5 & C6 Clousure Trims
€15.95 (ex vat)Fitted by using Fix ALL adhesive to bond/ seal the closure to the end of the rolled trim (overlap by 50mm), and by nailing the trim to the roofing deck. Tape and resin cover as per the corner trims.
- C5 Roof Ridge Closure – Preformed closure for application to the end of a roof ridge section. Use with E280 (Standard and in stock)
- C6 Rolled Rib Closure – Preformed closure for application to the end of ER40/30 details
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
-
Sale!
10kg Digital Scale
€17.82 (ex vat)These high capacity, high accuracy electronic digital scales are perfect for measuring GlassCast Resin and Hardener to the correct mix ratio.
-
Sale!
Fibreglass Safety Kit – Standard
€18.78 (ex vat)This Kit contains a selection of high quality vital body protection which should be used when working and handling with Liquid Chemicals and Sanding Fibreglass materials. Please note: The products shown are for general Fibreglass use i.e. Glassfibre Repair/ Roofing Contractor etc. More specialised areas such as Moulding workshops, Spraying etc. may require different needs. For further Safety Information please view our Health & Safety section on our web-site.
Contents: Tyvek® Protech Suit – 1 Full body protection, elasticated face, wrist & ankles, Category III Type 5B,6B/ 2 pair Chemical Resistant Disposable Gloves Cat 111 EN 374/ I Wrap around Spectacles EN166-F1- for Sanding/ 1 Disposable fold flat Mask, FFP3, dust & fume EN149:2009/ 3 pair Disposable Shoe Covers – elasticated ankles/ 2 pair Disposable Sleeve Covers – elasticated wrist & elbow, protects cloths/ 2 pair Ear Plugs – 3M™ Classic, 36db, all day comfort/ Name Tag – Identification & Ownership Fob, mixed colours/ Re-sealable bags – storage for safety Glasses & Mask/ 2.5lt White Container + Lid – for safe overall up-keep of the above items/ Full contents description + Health & Safety Information.
-
Sale!
Easy Composites EL2 Epoxy Resin (Laminating Resin)
€18.85 – €129.65 (ex vat)EL2 is a high performance epoxy laminating resin suitable for hand-layup of reinforcements such as carbon fibre, aramid and glass fibre. Its combination of mechanical performance, fast wet-out, easy handling and great value make EL2 a hugely popular choice in motorsport, boat-building, model-making and general composites.
Sold as a kit (kit weight = combined weight of resin and hardener). Available to buy online in 500g, 1kg & 5kg kits.
-
Sale!
A200 Facia Trim (95 x 90mm)
€18.92 – €20.68 (ex vat)Drip trims are fitted to the lowest edge of the roof where water will flow into the gutter. Two support battens should be fitted to the fascia to sit under the trim to allow a space for the gutter to fit behind the trim. Fix ALL adhesive should be used to bond the trim to the batten on the vertical face, and nails used to fix the horizontal face onto the roof decking.
Don’t nail through the face of the trim – this will show through the final topcoat finish on the front face. To join two lengths together simply overlap (by 50mm) and slot two pieces together using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape.
Fitted to the roof edges to allow drainage into the gutter.
- A170 (75 x 84mm)
- A200 (95 x 90mm) – (Standard and in stock – this is what we will ship)
- A250 (95 x 140mm) – (In stock – please phone 01 466 3786 to purchase)
- A200 (90 x 90mm) – (same A200, but with drip return)
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).
-
Sale!
B260 Raised Edge Trim
€18.92 – €20.68 (ex vat)Raised edge trims do not allow the water over the edge into gutters. They should be fitted on top of single battens that have been fixed to the fascia, as there doesn’t need to be a gap for a gutter to sit in. Fix ALL adhesive should be used to bond the trim to the batten on the vertical face, and nails used to fix the horizontal face onto the roof decking.
Don’t nail through the face of the trim – this will show through the final topcoat finish on the front face. To join two lengths together simply overlap (by 50mm) and slot two pieces together using Fix ALL adhesive to bond together, then tape and resin over the joint with woven tape.
All 3 metre lengths:
- B240 (100 x 105mm)
- B260 (130 x 125mm) (Standard and in stock – this is what we will ship)
- B300 (110 x 175mm) (In stock – please ph: 01 466 3786 to purchase)
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).
-
Sale!
C100 Simulated Lead Flashing
€18.92 – €20.68 (ex vat)C trims are lengths of simulated lead flashing with different depths of face. These trims should not be covered with topcoat, as they have a finished face already to simulated lead. The C trims should be slotted into a pre-chased mortar joint in the brickwork (approx 35-45mm deep), and sealed in with clear silicone. Fix ALL adhesive should also be used on the back of the C trims to bond to the D trim that they sit on top of.
All 3 metre lengths:
- C100 – 35 x 100mm (Standard and in stock)
- C150 – 35 x 150mm
CAUTION: Please take care when handling trims as edges can be very sharp. The use of protective gloves is advised.
Please Note: Our nationwide courier has notified us that they cannot carry any 3mt lengths (max 2mt). So the only option we have is to cut it to any length you require. If this is not acceptable, please contact us on 01 466 3786 to make alternative arrangements (which will incur extra costs).
